Jump to content
Check your account email address ×

2024 Arctic Cat Catalyst 'Chassis' details?


Recommended Posts

3 hours ago, Crnr2Crnr said:

why didn't they put the right belt on at the factory?

the proper length ultimax belt is good for 147mph

if you trim the keel of the left ski down 3/16" there's another 0.7mph 

 

Unfortunately Ultimax is only available to the Cat factory pros unless you got a hook up at NAPA. 

Link to comment
Share on other sites

31 minutes ago, AK440 said:

Unfortunately Ultimax is only available to the Cat factory pros unless you got a hook up at NAPA. 

they're a big Snocross sponsor but wouldn't give the Iran Dog two nickles

Link to comment
Share on other sites

18 minutes ago, Palu49 said:

Buckle up boys this might get good

IMG_3254.png

I like his response to my comment " I see you found some good info on when we did some testing on the dyno awhile ago. 👍To answer your question....we know what works and what doesn't."

Clearly he didnt do it right the first time.

  • Like 1
Link to comment
Share on other sites

3 hours ago, fortune46x said:

I like his response to my comment " I see you found some good info on when we did some testing on the dyno awhile ago. 👍To answer your question....we know what works and what doesn't."

Clearly he didnt do it right the first time.

He’s mad and his whole crew is mad now. I brought up how he didn’t ever post any specifics and just spammed another 7mph gimmick every day and it set them all off hard.

  • Like 1
Link to comment
Share on other sites

Just now, ZR6000RR said:

Are you in to that? 

Into that???   WTF are you talking about?  Still waiting on the new and improved gear set for the cattle blast with average clutching. 

Link to comment
Share on other sites

23 minutes ago, jonlafon1 said:

Into that???   WTF are you talking about?  Still waiting on the new and improved gear set for the cattle blast with average clutching. 

Your fucked! Racers first. The average consumer could care less as they are 95% of the purchasers (could be higher, might be lower), and are fine with a stock setting. 

  • Haha 1
Link to comment
Share on other sites

7 minutes ago, ZR6000RR said:

Your fucked! Racers first. The average consumer could care less as they are 95% of the purchasers (could be higher, might be lower), and are fine with a stock setting. 

You are not average.

You are 100% retard (could be higher, can't be lower)

  • Like 3
  • Haha 3
Link to comment
Share on other sites

2 minutes ago, awful knawful said:

You are not average.

You are 100% retard (could be higher, can't be lower)

Way above! I understand that you have to build a sled to the largest percentage of riders. Guessing this is above your, helmet wearing, short bus riding mentally. 

Link to comment
Share on other sites

24 minutes ago, ZR6000RR said:

Your fucked! Racers first. The average consumer could care less as they are 95% of the purchasers (could be higher, might be lower), and are fine with a stock setting. 

Hah?  Average what of a percentages means who? :wind:

Link to comment
Share on other sites

24 minutes ago, awful knawful said:

You are not average.

You are 100% retard (could be higher, can't be lower)

 

19 minutes ago, ZR6000RR said:

Way above!

Yes, way above 100% retard

Link to comment
Share on other sites

17 minutes ago, ZR6000RR said:

You are. That's NYM, NY.

Its pitiful that the best comeback you've got is something a little kid would use

image.jpeg.54026011090e47bfecde1b05bf4c34ce.jpeg

Edited by krom
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Trying to pay the bills, lol

×
×
  • Create New...