2024 Arctic Cat Catalyst 'Chassis' details?

[jonlafon1]

Blowing belts usually changes offset. If you’re not on point on that stub shaft and alignment, you better buy lots of belts. Bang.  Bang.  Especially running big tunes with enlarged intercooler, big pump, headers. Guessing Tomcat knows this already.  It’s not flashing news.  Old news actually.  Amazing how far off the “book “ was on the 17’s. For offset numbers. 
 

back to the year o ft the helix !!  2024 cats 

Edited February 14, 2024 by jonlafon1

[krom]

6 minutes ago, jonlafon1 said:

Blowing belts usually changes offset. If you’re not on point on that stub shaft and alignment, you better buy lots of belts. Bang.  Bang.  Especially running big tunes with enlarged intercooler, big pump, headers. Guessing Tomcat knows this already.  It’s not flashing news.  Old news actually.  Amazing how far off the “book “ was on the 17’s. For offset numbers. 
 

back to the year o ft the helix !!  2024 cats 

It was only yami's offset that was off in 17 from what I saw.

but you're right the moving stub is old news.

[jonlafon1]

Just now, krom said:

It was only yami's offset that was off in 17 from what I saw.

but you're right the moving stub is old news.

Well guys would come on and say I blew a belt and it keeps getting worse. The t cats were good?  Could be I stepped away from cat for a few years kinda.  2015 -2021.  But I actually like the adapts alot.  The wife has always been on one.  And she says it better be green!! 

[krom]

back on topic, sorta..

the 858 takes the same final drive belt as the 600

The clutch drive belt is the same pn they accidentally released in 2 years ago. MSRP $199.95

[mnstang]

8 minutes ago, krom said:

back on topic, sorta..

the 858 takes the same final drive belt as the 600

The clutch drive belt is the same pn they accidentally released in 2 years ago. MSRP $199.95

Hopefully the helixes aren't the same, because we know what that means!

[jonlafon1]

Just now, mnstang said:

Hopefully the helixes aren't the same, because we know what that means!

That might be okay actually!!   No shit. The 858 will pull that helix easy. 

[Tommcat]

1 hour ago, krom said:

you bother to do anything on the ones that have had the bearing/stub shaft walk into the engine throwing the offset out of whack?

Depends how bad. Most of them just need the secondary adjusted a bit to correct offset.

[krom]

@ZR6000RR

Remember lying and saying that the G8 display just clips onto the existing hood???

[Palu49]

Just now, krom said:

@ZR6000RR

Remember lying and saying that the G8 display just clips onto the existing hood???

Mounts from the top obviously idiot!

[fortune46x]

Wait till the truth comes out about the lower top speed and the eccentric bearing carrier 

[Not greg b]

1 hour ago, fortune46x said:

Wait till the truth comes out about the lower top speed and the eccentric bearing carrier 

The truth is, it is perfect. You bought the wrong sled if you want to go faster than 25mph 

[Not greg b]

2 hours ago, Palu49 said:

Mounts from the top obviously idiot!

I got glue. We can stick that game boy screen to anything on the sled. I am thinking the handle bar pad 

[Not greg b]

Shorter softer belt solves issue with a clutch cover. Big mph 

[Premium]

10 hours ago, jonlafon1 said:

Blowing belts usually changes offset. Amazing how far off the “book “ was on the 17’s. For offset numbers. 
 

 

10 hours ago, krom said:

It was only yami's offset that was off in 17 from what I saw.

but you're right the moving stub is old news.

With my 17 Cat 998, it would blow at 2k miles like clockwork with OEM belts (I felt this was totally acceptable given the power level). Started using Ultimax with even better success, even with a tune.

I gotta say, overall that sled is easily the most powerful yet most reliable sled I've ever owned. It just works. Granted, I have done some PM items like different top gear, brass shift fork pads, etc.

Edited February 14, 2024 by Premium

[Palu49]

6 hours ago, Not greg b said:

Shorter softer belt solves issue with a clutch cover. Big mph 

The clutch cover fixed all the problems yesterday but today we need the clutch cover and a super secret gates belt to do 146mph on mashed potato snow guaranteed!!

[Crnr2Crnr]

6 hours ago, Not greg b said:

Shorter softer belt solves issue with a clutch cover. Big mph 

why didn't they put the right belt on at the factory?

16 minutes ago, Palu49 said:

The clutch cover fixed all the problems yesterday but today we need the clutch cover and a super secret gates belt to do 146mph on mashed potato snow guaranteed!!

the proper length ultimax belt is good for 147mph

if you trim the keel of the left ski down 3/16" there's another 0.7mph 

 

Edited February 14, 2024 by Crnr2Crnr

[jonlafon1]

7 minutes ago, Crnr2Crnr said:

why didn't they put the right belt on at the factory?

the proper length ultimax belt is good for 147mph

if you trim the keel of the left ski down 3/16" there's another 0.7mph 

 

NO!  I prefer average set ups. 

[Palu49]

33 minutes ago, Crnr2Crnr said:

why didn't they put the right belt on at the factory?

the proper length ultimax belt is good for 147mph

if you trim the keel of the left ski down 3/16" there's another 0.7mph 

 

Stop giving out terrys secrets! People are starting to call him out on there and I love it

[Crnr2Crnr]

7 minutes ago, Palu49 said:

Stop giving out terrys secrets! People are starting to call him out on there and I love it

so I shouldn't mention the Boyseen reeds?

[Palu49]

2 minutes ago, Crnr2Crnr said:

so I shouldn't mention the Boyseen reeds?

Depends, is it the Boyesen rad valve or rage cage 

Edited February 14, 2024 by Palu49

[Crnr2Crnr]

2 minutes ago, Palu49 said:

Depends, is it the Boyesen rad valve or rage cage 

it totally depends if you are doing the titanium wrist pin mod or not... 

 

[Not greg b]

44 minutes ago, Crnr2Crnr said:

it totally depends if you are doing the titanium wrist pin mod or not... 

 

Need some nsp Polar bear turds 

[fortune46x]

Do I stir the pot and post the claims he made on the ty pages? lol

 

[Not greg b]

30 minutes ago, fortune46x said:

Do I stir the pot and post the claims he made on the ty pages? lol

 

I would be concerned if you didn’t stir a pot 

[Palu49]

Who’s side is Ben on?!