Platinum Contributing Member Rigid1 Posted July 21, 2018 Platinum Contributing Member Share Posted July 21, 2018 1 hour ago, racinfarmer said: Any of you men need a vice? I already have on thanks 1 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted July 21, 2018 Author Share Posted July 21, 2018 1 minute ago, Rigid1 said: I already have on thanks I said men, and I said vice. 1 Quote Link to comment Share on other sites More sharing options...
NaturallyAspirated Posted July 21, 2018 Share Posted July 21, 2018 Got the yaw.hub welded to the top of the pipe coupler for the 5kw wind turbine. The pipe is 7". Dad has had this project sitting around for a decade. Now that the place.is mine up it goes. Neal 4 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Jimmy Snacks Posted July 21, 2018 Platinum Contributing Member Share Posted July 21, 2018 14 minutes ago, NaturallyAspirated said: Got the yaw.hub welded to the top of the pipe coupler for the 5kw wind turbine. The pipe is 7". Dad has had this project sitting around for a decade. Now that the place.is mine up it goes. Neal You've got quite the operation going at the old homestead Neal....very cool. 1 1 Quote Link to comment Share on other sites More sharing options...
dz246 Posted July 21, 2018 Share Posted July 21, 2018 1 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted July 21, 2018 Share Posted July 21, 2018 2 hours ago, dz246 said: Some good research done on consumer demand there!!!! Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted July 24, 2018 Author Share Posted July 24, 2018 1 4 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted July 28, 2018 Author Share Posted July 28, 2018 Gentlemens, if you spend way too much time fighting spring pins like I do, pick yourself up a set of spring pin punches. These are from Wilde and run around a $20 spot, made somewhere in Kansas. Dasco and Enderes are made in the US too. If you are a real baller, get a set of Starrett punches. 1 Quote Link to comment Share on other sites More sharing options...
Woodtick Posted July 28, 2018 Share Posted July 28, 2018 One of my customers air compressors came unglued. The head was found 20 feet away. 2 2 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted July 28, 2018 Author Share Posted July 28, 2018 This was posted to one of the single cylinder racing groups. Someones Yamaha 292 had a few too many rippums. 2 1 1 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted July 28, 2018 Share Posted July 28, 2018 3 minutes ago, Woodtick said: One of my customers air compressors came unglued. The head was found 20 feet away. Holy shit. Moral of story: don’t use glue to assemble my air compressor. Got it. Quote Link to comment Share on other sites More sharing options...
Woodtick Posted July 28, 2018 Share Posted July 28, 2018 Just now, Zambroski said: Holy shit. Moral of story: don’t use glue to assemble my air compressor. Got it. Parts everywhere but no oil needed to be cleaned up? Quote Link to comment Share on other sites More sharing options...
Zambroski Posted July 28, 2018 Share Posted July 28, 2018 5 minutes ago, Woodtick said: Parts everywhere but no oil needed to be cleaned up? Oil free? Lol!!! It’s a choice on all compressors I hear. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted August 4, 2018 Author Share Posted August 4, 2018 Gentlemens, what does one do with a $25 cash card (probably from cheap snowmobile oil or something) that expires this month? Spend it on food? Something nice for the wife or kid? Something for the house? Hellz naw! Wilde punch holder and 16" Masterforce screwdriver from Menards! I suspect that the Masterforce line of screwdrivers is made by Wilde, judging by the color of the acetate handle and the general style of it. Also, more Wilde stuff is available at Harry Epstein, if you all need more pliers, screwing stuff, scrapers, punches, or the like. https://www.harryepstein.com/index.php/tool-brand/wilde.html 1 Quote Link to comment Share on other sites More sharing options...
2strokemerc Posted August 4, 2018 Share Posted August 4, 2018 On 7/27/2018 at 8:44 PM, Woodtick said: Parts everywhere but no oil needed to be cleaned up? Was going to say, a little maintenance once in a while (like adding oil) goes a long way. Quote Link to comment Share on other sites More sharing options...
2strokemerc Posted August 4, 2018 Share Posted August 4, 2018 What does every body use for a trouble light when your working under the car. My old style light is either shining in my face or some place other than where I'm working. Drives me nuts. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted August 4, 2018 Author Share Posted August 4, 2018 Bayco, but it seems like no matter what I do, I can't get the charge back into the two I have. Probably get the Horrible Freight knock-off ones. Speaking of Horrible Freight, if you look at the price of the screwin stuff at the Horrible Freight vs. the Masterforce line at Menards, it really isn't that much more to get the made in the US Masterforce brand. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted August 5, 2018 Author Share Posted August 5, 2018 What say to guys to a pair of late model Ski-Doo Elan 250's? Good sleds? There is a pair that run and are cheap within a reasonable drive... Quote Link to comment Share on other sites More sharing options...
Beavis and Butt-Head Posted August 5, 2018 Share Posted August 5, 2018 31 minutes ago, racinfarmer said: What say to guys to a pair of late model Ski-Doo Elan 250's? Good sleds? There is a pair that run and are cheap within a reasonable drive... Around here people think they are gold or something. Here a good example https://nh.craigslist.org/snw/d/skidoo-elan/6659498925.html Quote Link to comment Share on other sites More sharing options...
snatchslayer Posted August 5, 2018 Share Posted August 5, 2018 On 7/19/2018 at 7:43 PM, racinfarmer said: You need more ratchets. Also, pick yourself up some socket trays. I have the socket backbone holders. Omg,can not imagine having loose sockets in the drawer 1 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted August 5, 2018 Share Posted August 5, 2018 8 minutes ago, xcr700 said: I have the socket backbone holders. Omg,can not imagine having loose sockets in the drawer Mine were all over the place for a few years until I just cleaned them up. It made even the smallest of projects miserable. Quote Link to comment Share on other sites More sharing options...
snatchslayer Posted August 5, 2018 Share Posted August 5, 2018 33 minutes ago, Zambroski said: Mine were all over the place for a few years until I just cleaned them up. It made even the smallest of projects miserable. No doubt. I remember every single fuckin time I'd open or close the drawer ,shit would roll everywhere...fuck that noise already Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member steve from amherst Posted August 5, 2018 Platinum Contributing Member Share Posted August 5, 2018 Just now, xcr700 said: No doubt. I remember every single fuckin time I'd open or close the drawer ,shit would roll everywhere...fuck that noise already And ya havnt seen the 1/2 in in 2 yrs even thou you own 7 of them. 1 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted August 5, 2018 Share Posted August 5, 2018 9 minutes ago, steve from amherst said: And ya havnt seen the 1/2 in in 2 yrs even thou you own 7 of them. 10MM Quote Link to comment Share on other sites More sharing options...
f7ben Posted August 5, 2018 Share Posted August 5, 2018 Just about done refinishing the 3 stall attached at the Indiana house here. Epoxying the floor and then it will be done. Looks good 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.