ActionfigureJoe Posted December 22, 2018 Share Posted December 22, 2018 3 hours ago, Ez ryder said: like I said before the guy dfise not walk on water but he can build a good motor . now go Finnish choking on your husbands cock Mistakes do happen. Dan cut the squish bands with a .010” inch difference on a 660 head. That was back in “06. He’s not god. Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 1 minute ago, ActionfigureJoe said: Mistakes do happen. Dan cut the squish bands with a .010” inch difference on a 660 head. That was back in “06. He’s not god. If the head is cut flat this would be a piston issue? Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 Polaris engineer: "We've tested it for 4 years. It's good to go!" 3 Quote Link to comment Share on other sites More sharing options...
ActionfigureJoe Posted December 22, 2018 Share Posted December 22, 2018 7 minutes ago, awful knawful said: If the head is cut flat this would be a piston issue? No. He cut the squish on one side too deep. Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 1 minute ago, ActionfigureJoe said: No. He cut the squish on one side too deep. Separate domes? Quote Link to comment Share on other sites More sharing options...
ActionfigureJoe Posted December 22, 2018 Share Posted December 22, 2018 Just now, awful knawful said: Separate domes? Single, stock head from and “06 600. Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 So outside to outside off by 10 thou? Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 22, 2018 Share Posted December 22, 2018 16 minutes ago, awful knawful said: So outside to outside off by 10 thou? You dont understand a 2 stroke head....do you Quote Link to comment Share on other sites More sharing options...
Kev144 Posted December 22, 2018 Share Posted December 22, 2018 1 minute ago, f7ben said: You dont understand a 2 stroke head....do you The only head awfully full of knobs know is the one he wants to give z notty Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted December 22, 2018 Share Posted December 22, 2018 46 minutes ago, ActionfigureJoe said: Single, stock head from and “06 600. then how would he even pull that off ? 1 Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 33 minutes ago, f7ben said: You dont understand a 2 stroke head....do you Yes I do. Explain how it off by 10 thou unless from outside of one cylinder to outside of other. Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 32 minutes ago, Kev144 said: The only head awfully full of knobs know is the one he wants to give z notty Out come the clowns! Quote Link to comment Share on other sites More sharing options...
Anler Posted December 22, 2018 Share Posted December 22, 2018 I'm calling bs on the 850. But I have a good friend who is a service manager for a poo dealer network. If it's a problem he will tell me. So far I think it's going to be an awesome sled/engine package. Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted December 22, 2018 Share Posted December 22, 2018 1 minute ago, awful knawful said: Yes I do. Explain how it off by 10 thou unless from outside of one cylinder to outside of other. even to do that the equipment would have to be extremely fucked up. not sure how you could do it 1 Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 22, 2018 Share Posted December 22, 2018 (edited) 7 minutes ago, Anler said: I'm calling bs on the 850. But I have a good friend who is a service manager for a poo dealer network. If it's a problem he will tell me. So far I think it's going to be an awesome sled/engine package. Hope so. I don't know too much about how modern cylinders are finished. But that bearing doesn't look good. Even to a backyard mechanic like me. What do you see? Edited December 22, 2018 by awful knawful Quote Link to comment Share on other sites More sharing options...
DriftBusta Posted December 22, 2018 Share Posted December 22, 2018 7 minutes ago, Anler said: I'm calling bs on the 850. But I have a good friend who is a service manager for a poo dealer network. If it's a problem he will tell me. So far I think it's going to be an awesome sled/engine package. I thought mine was pretty bad ass too until it said fuck you and handed me a 5400 dollar bill 1 Quote Link to comment Share on other sites More sharing options...
Reevester Posted December 22, 2018 Share Posted December 22, 2018 17 minutes ago, DriftBusta said: I thought mine was pretty bad ass too until it said fuck you and handed me a 5400 dollar bill I was probably just a coil issue before you decided to ride it on one cylinder 50 miles. 1 Quote Link to comment Share on other sites More sharing options...
Legend Posted December 22, 2018 Share Posted December 22, 2018 1 hour ago, Jimmy Snacks said: So EZGliders Swiss cheese brain actually worked for him this time! 😂 He got lucky....... He sure is one stupid motherfucker. Quote Link to comment Share on other sites More sharing options...
Beavis and Butt-Head Posted December 22, 2018 Author Share Posted December 22, 2018 Just found out the hp #’s on new updated doo 600 e tec , 133.5 hp @ 8250-8300 rpm not bad at all but I think at the end of day I still prefer 800. Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 22, 2018 Share Posted December 22, 2018 1 hour ago, awful knawful said: Yes I do. Explain how it off by 10 thou unless from outside of one cylinder to outside of other. Each squish band depth , width and angle is cut individually. You dont know what you're babbling about as usual Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted December 22, 2018 Share Posted December 22, 2018 2 hours ago, Jimmy Snacks said: So EZGliders Swiss cheese brain actually worked for him this time! 😂 lol worked. yes that is somthing people did that can afford to buy them self and there kids new snomobiles . as opposed to old calpped out 3rd hand shit . Quote Link to comment Share on other sites More sharing options...
Angry ginger Posted December 22, 2018 Share Posted December 22, 2018 4 hours ago, awful knawful said: My bud blew up his 13 assault in 2015 100km left on 4 year limited warranty. Repaced "parts only" no longblock. Bill was $4800! And warranty only covered up too $5000! I guess we have to read the fine print on our warranties. He got lucky. Soon traded for used nytro. Poo warranty is a game. Doos is easy peasy Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted December 22, 2018 Share Posted December 22, 2018 4 minutes ago, f7ben said: Each squish band depth , width and angle is cut individually. You dont know what you're babbling about as usual not always the case . last few heads I had 10 tho cut off were done as the whole head in 2 passes . I gave never seen one done any other way but then I only know 1 machinist with the tools to do it in his garage . now reshaping the dome after a cut is a diff story Quote Link to comment Share on other sites More sharing options...
Zambroski Posted December 22, 2018 Share Posted December 22, 2018 2 minutes ago, Angry ginger said: Poo warranty is a game. Doos is easy peasy Fact. Cat's warranty, "Cat Care", while I've never used it, sounds like a similar game. Quote Link to comment Share on other sites More sharing options...
Reevester Posted December 22, 2018 Share Posted December 22, 2018 2 minutes ago, Zambroski said: Fact. Cat's warranty, "Cat Care", while I've never used it, sounds like a similar game. I've used it dozen of times. Always helps to have a good dealer too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.