Anler Posted November 15, 2019 Share Posted November 15, 2019 Just now, SVT MXZ XRS said: I run a low or ultra low and do a lot more than 50 a day. Oh well that's gay! Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 15, 2019 Share Posted November 15, 2019 (edited) Waiting on handguards to dry. Will be another day for them. I took one off '17 for that pic to see how they would look with the red. Edited November 15, 2019 by SVT MXZ XRS Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 15, 2019 Share Posted November 15, 2019 Just now, Anler said: Oh well that's gay! No, that's you Quote Link to comment Share on other sites More sharing options...
Anler Posted November 15, 2019 Share Posted November 15, 2019 Any of you Ricky racers ever heard of aerodynamics? Not chassis Dynamics, AERODYNAMICS! look it up! Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted November 15, 2019 Share Posted November 15, 2019 3 minutes ago, SVT MXZ XRS said: These are on my '17 More like 6 Same here I don't remember how long it took. Couple of days Zero runs No runs? You clearly don't know what you are doing whilst painting sleds. 3 minutes ago, Zambroski said: I’ve got a medium you can have. At least I think it’s a medium...might be a small. It came with the sled. Windshield budget for the year is 2. Quote Link to comment Share on other sites More sharing options...
Anler Posted November 15, 2019 Share Posted November 15, 2019 Mohawks are the least aerodynamic! Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 15, 2019 Share Posted November 15, 2019 Just now, racinfarmer said: No runs? You clearly don't know what you are doing whilst painting sleds. Windshield budget for the year is 2. Lol, I learned from a great painter. I've shot a few coats on cars before. Just have to take your time Quote Link to comment Share on other sites More sharing options...
Zambroski Posted November 15, 2019 Share Posted November 15, 2019 1 minute ago, Anler said: Fuck those short ass windshields! Buncha 50 mile Loopers in here! 2 Quote Link to comment Share on other sites More sharing options...
Anler Posted November 15, 2019 Share Posted November 15, 2019 29 minutes ago, thewayout said: Those poo prices are nuts. I'd also much rather have the XCR over the XC personally, so from that side of things, saving the money and going with that is a no brainer. You made the right call, the X is just so bland in the G4 nowadays it makes no sense to get one. TNT/blizzard or XRS is the only way to go on a doo unless you are going with something like exits, then even an adrenaline 850 would be fine. Werd. Switchy Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted November 15, 2019 Share Posted November 15, 2019 1 minute ago, SVT MXZ XRS said: Lol, I learned from a great painter. I've shot a few coats on cars before. Just have to take your time Taking your time starts with at least 1/2 dozen beers before you decide it is a good idea to paint something with shitty prep. It is the UP, the Amelia Island. Quote Link to comment Share on other sites More sharing options...
Angry ginger Posted November 15, 2019 Share Posted November 15, 2019 (edited) 11 hours ago, thewayout said: Thanks Tom! I was going to plastidip the windshield black, but am unsure how it will hold up. Have you had any luck with painting windshields and having them hold up? plastidip/paint the inside not the out and it will be fine. Edited November 15, 2019 by Angry ginger Quote Link to comment Share on other sites More sharing options...
AKIQPilot Posted November 15, 2019 Share Posted November 15, 2019 11 hours ago, thewayout said: Thanks Tom! I was going to plastidip the windshield black, but am unsure how it will hold up. Have you had any luck with painting windshields and having them hold up? I havent seen plastidip hold up well on any sled parts. Im sure you could get a black paint to stick. Just need to find the right paint. Quote Link to comment Share on other sites More sharing options...
Zambroski Posted November 15, 2019 Share Posted November 15, 2019 Just now, AKIQPilot said: I havent seen plastidip hold up well on any sled parts. Im sure you could get a black paint to stick. Just need to find the right paint. Yep, my buddy painted his green screen with some good rattle can primer and gloss black paint. It held up perfect for two years before he sold it. I was surprised. like all painting...it's all in the prep work. Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 18, 2019 Share Posted November 18, 2019 On 11/15/2019 at 9:28 AM, AKIQPilot said: I havent seen plastidip hold up well on any sled parts. Im sure you could get a black paint to stick. Just need to find the right paint. I already told him what works @thewayout 6 light coats on the inside Make sure you mask the outside with some masking/painters tape 1 Quote Link to comment Share on other sites More sharing options...
AKIQPilot Posted November 18, 2019 Share Posted November 18, 2019 10 minutes ago, SVT MXZ XRS said: I already told him what works @thewayout 6 light coats on the inside Make sure you mask the outside with some masking/painters tape Those look good. 1 Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 18, 2019 Share Posted November 18, 2019 3 minutes ago, AKIQPilot said: Those look good. just have to take your time and do light coats. Quote Link to comment Share on other sites More sharing options...
awful knawful Posted November 18, 2019 Share Posted November 18, 2019 On 11/14/2019 at 11:24 PM, SVT MXZ XRS said: I priced out 129's and 137's in both Doo XRS's and Poo XC and XCR Prices I got from my dealer that I bought from (which were the lowest) was Poo 129" XCR $14,8?? Poo 137" XC $15,4?? Renegade XRS $14,218. And my MXZ XRS $13,727. Those are ALL OTD prices , which includes 6% sales tax. But but Doo is the most expensive! 1 Quote Link to comment Share on other sites More sharing options...
Tomas. Posted November 18, 2019 Share Posted November 18, 2019 I am in the middle of disassembling my DD from my 07 crossfire. I could use a little guidance. Is there some who can message me? Thanks Quote Link to comment Share on other sites More sharing options...
Tomas. Posted November 26, 2019 Share Posted November 26, 2019 Potentially a dumb question. My 08 d7 right hand grip doesn't work/heat up. I am not getting any ohms of resistance on the plug. Is there a simple fix or do I have to rip the grips off and get new ones? Quote Link to comment Share on other sites More sharing options...
Zambroski Posted November 26, 2019 Share Posted November 26, 2019 25 minutes ago, Tomas. said: Potentially a dumb question. My 08 d7 right hand grip doesn't work/heat up. I am not getting any ohms of resistance on the plug. Is there a simple fix or do I have to rip the grips off and get new ones? Unless there is an electrical short going to the element, it’s toast. You should be able to pull the grips off with heat and blow some air into the bars to pull them off and put them back on over new elements. If not, fuck them...just buy new grips too. Quote Link to comment Share on other sites More sharing options...
SVT MXZ XRS Posted November 26, 2019 Share Posted November 26, 2019 Element is probably toast. Not that hard to change Quote Link to comment Share on other sites More sharing options...
Tomas. Posted November 27, 2019 Share Posted November 27, 2019 I called Polaris today and they have elements in stock for $45 cad. I also pulled all my idler wheels off as the need bearings and I have two wheels that take a 6007 bearing. Royal doesn't even sell them and they are $67 each from a local bearing supplier but 0 stock. Wtf. The rest are 6004 and super cheap and widely available. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted November 27, 2019 Share Posted November 27, 2019 17 minutes ago, Tomas. said: I called Polaris today and they have elements in stock for $45 cad. I also pulled all my idler wheels off as the need bearings and I have two wheels that take a 6007 bearing. Royal doesn't even sell them and they are $67 each from a local bearing supplier but 0 stock. Wtf. The rest are 6004 and super cheap and widely available. 6007-2RS's are under $20/us each from McMaster. Quote Link to comment Share on other sites More sharing options...
Tomas. Posted November 27, 2019 Share Posted November 27, 2019 Just now, racinfarmer said: 6007-2RS's are under $20/us each from McMaster. Hmm. A shop in Ontario I used to work for years ago bought a lot from them. I wonder what shipping would be like? They work out to just under $27each. Thanks. I will check them out right now Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted November 27, 2019 Share Posted November 27, 2019 1 minute ago, Tomas. said: Hmm. A shop in Ontario I used to work for years ago bought a lot from them. I wonder what shipping would be like? They work out to just under $27each. Thanks. I will check them out right now Amazon that stuff, now that I think of it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.