Crnr2Crnr Posted February 20 Share Posted February 20 (edited) https://www.brplynx.com/us/en/ still tippy? Edited February 20 by Crnr2Crnr Quote Link to comment Share on other sites More sharing options...
krom Posted February 20 Share Posted February 20 they are up to gen 15 XXRXQZY super duper front suspension now 3 Quote Link to comment Share on other sites More sharing options...
mnstang Posted February 20 Share Posted February 20 They should start by stopping the active effort to make them look as ugly as humanly possible. 4 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 20 Author Share Posted February 20 Quote Link to comment Share on other sites More sharing options...
mnstang Posted February 20 Share Posted February 20 7 minutes ago, Crnr2Crnr said: He sounds like he has a dick in his mouth. They should have someone that talks normal, most people don't want a really foreign machine they want something familiar from normal people. I understand they have roots from over there but you're selling to North America. Marketing tip they can have. Quote Link to comment Share on other sites More sharing options...
Palu49 Posted February 20 Share Posted February 20 The a arms aren’t 45° out from the tie rods so they may have cured their 20 years of 4” bump steer Quote Link to comment Share on other sites More sharing options...
AK440 Posted February 20 Share Posted February 20 1 hour ago, mnstang said: He sounds like he has a dick in his mouth. They should have someone that talks normal, most people don't want a really foreign machine they want something familiar from normal people. I understand they have roots from over there but you're selling to North America. Marketing tip they can have. Really…? Sounds like you’re speaking from experience there. 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 20 Author Share Posted February 20 16 minutes ago, Palu49 said: The a arms aren’t 45° out from the tie rods so they may have cured their 20 years of 4” bump steer seems as though they might have learned something from their SNOCROSS sleds? but, SX is irrelevant to developing anything for trail sleds we've been told. would still like to see the Lynx Enduro 600 make it's way to North America... 1 Quote Link to comment Share on other sites More sharing options...
AK440 Posted February 21 Share Posted February 21 13 minutes ago, Crnr2Crnr said: seems as though they might have learned something from their SNOCROSS sleds? but, SX is irrelevant to developing anything for trail sleds we've been told. would still like to see the Lynx Enduro 600 make it's way to North America... The front ends of their Iron Dog sleds like to fall off completely. Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 21 Author Share Posted February 21 (edited) 10 minutes ago, AK440 said: The front ends of their Iron Dog sleds like to fall off completely. of course they do, just like the previous gen S-modules on their SX sleds. Doo updated the S-module on the 2024 SX sleds. product development... The RS-specific front S-Module is also reinforced for improved durability and because racing can lead to unexpected events, the ignition coil and RAVE motor have been relocated inboard to protect from impacts. RAS RS Front Suspension Shorter Kashima coated 46mm KYB Pro R Series shocks (High Speed / Low Speed compression and High Speed / Low Speed Rebound adjustments) Integral Base Valve Adjuster Stiffer shock springs Rack steering with power assist Long Spindle design (Stronger + better speed cornering) Lightweight Pilot R2 Ski - Reinforced https://ski-doo.brp.com/gb/en/ski-doo-feeling/mxz-x-600-rs-2024.html Edited February 21 by Crnr2Crnr Quote Link to comment Share on other sites More sharing options...
J. Jackson Posted February 21 Share Posted February 21 2 hours ago, mnstang said: He sounds like he has a dick in his mouth. They should have someone that talks normal, most people don't want a really foreign machine they want something familiar from normal people. I understand they have roots from over there but you're selling to North America. Marketing tip they can have. They should have had the chick that Cat did at Haydays. She was great at marketing! 1 Quote Link to comment Share on other sites More sharing options...
Not greg b Posted February 21 Share Posted February 21 The active ride control looks neat Quote Link to comment Share on other sites More sharing options...
AK440 Posted February 21 Share Posted February 21 2 hours ago, Crnr2Crnr said: of course they do, just like the previous gen S-modules on their SX sleds. Doo updated the S-module on the 2024 SX sleds. product development... The RS-specific front S-Module is also reinforced for improved durability and because racing can lead to unexpected events, the ignition coil and RAVE motor have been relocated inboard to protect from impacts. RAS RS Front Suspension Shorter Kashima coated 46mm KYB Pro R Series shocks (High Speed / Low Speed compression and High Speed / Low Speed Rebound adjustments) Integral Base Valve Adjuster Stiffer shock springs Rack steering with power assist Long Spindle design (Stronger + better speed cornering) Lightweight Pilot R2 Ski - Reinforced https://ski-doo.brp.com/gb/en/ski-doo-feeling/mxz-x-600-rs-2024.html You know as well as I do that the ‘25 consumer sled isn’t getting all the actual race sled parts and pieces. Good to see they finally changed geometry, but sno-x geometry sucks ass for high speed trails. Just ask Polaris back in the Edge/Pro-X days. The Edge was a far superior front end for high speed stability. Most trial riders don’t spend their days ripping corners in tight woods because it’s too hard on their feeble little arms and they actually have to move their ass from one side of the seat to another. Doo is great at marketing and riders new to the sport or dipshits will think they are getting race sled shit when they aren’t. That’s the Doo way. Quote Link to comment Share on other sites More sharing options...
Deephaven Posted February 21 Share Posted February 21 Do you only ride with women? Is that so you can borrow their sled? Quote Link to comment Share on other sites More sharing options...
AK440 Posted February 21 Share Posted February 21 2 minutes ago, Deephaven said: Do you only ride with women? Is that so you can borrow their sled? Huh? Where’s your imaginary sled? It’s becoming more and more obvious you don’t have one. You’re like the guy who farts in class and tries to blame someone else. You don’t own and sled and go above and beyond deflecting that fact as much as possible. 1 Quote Link to comment Share on other sites More sharing options...
Georgedic Posted February 21 Share Posted February 21 I wanted to bring up the tragic incident that occurred during the Kansas City Parade shooting a while back. It was a heartbreaking event that left many people injured and even claimed the lives of some innocent bystanders. Quote Link to comment Share on other sites More sharing options...
jonlafon1 Posted February 21 Share Posted February 21 2 minutes ago, Georgedic said: I wanted to bring up the tragic incident that occurred during the Kansas City Parade shooting a while back. It was a heartbreaking event that left many people injured and even claimed the lives of some innocent bystanders. Take it over to current events. 1 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted February 21 Share Posted February 21 3 hours ago, Crnr2Crnr said: seems as though they might have learned something from their SNOCROSS sleds? but, SX is irrelevant to developing anything for trail sleds we've been told. would still like to see the Lynx Enduro 600 make it's way to North America... Not sure on the Enduro, but I've heard you'll be able to get a 600 for 2025. Guess I better start saving my nickels and dimes. Quote Link to comment Share on other sites More sharing options...
Not greg b Posted February 21 Share Posted February 21 Hopefully they have more metal in the rear tunnel than the catalyst. The top of my tunnel looks like a teenagers with all the dimples sticking out of it Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 21 Author Share Posted February 21 (edited) 9 hours ago, racinfarmer said: Not sure on the Enduro, but I've heard you'll be able to get a 600 for 2025. Guess I better start saving my nickels and dimes. You can build a Rave 600 on the website... $18,449 before adding anything to it. Pretty certain it's not the shorty Enduro. $19,649 for the 850 bare bones. The Polaris Cross Country is looking better every day. Edited February 21 by Crnr2Crnr Quote Link to comment Share on other sites More sharing options...
jonlafon1 Posted February 21 Share Posted February 21 10 hours ago, Not greg b said: Hopefully they have more metal in the rear tunnel than the catalyst. The top of my tunnel looks like a teenagers with all the dimples sticking out of it They using thinner metal to save weight? or just shit Rocky/mud trails this year everywhere around these parts. Quote Link to comment Share on other sites More sharing options...
X2700 Posted February 21 Share Posted February 21 they should of run the lynx in the iron dog then we'd know its ready for battle!! Quote Link to comment Share on other sites More sharing options...
X2700 Posted February 21 Share Posted February 21 still like to see that lynx rear skid stuffed in my xcr!!! Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 21 Author Share Posted February 21 56 minutes ago, X2700 said: still like to see that lynx rear skid stuffed in my xcr!!! they already did... Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted February 21 Author Share Posted February 21 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.