fortune46x Posted October 21, 2021 Share Posted October 21, 2021 5 minutes ago, Palu49 said: Did you end up getting your hands on an RXC? I did … just waiting for the confirmation to head to TRF to pick it up and get a black cat burger. 1 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 7 hours ago, Crnr2Crnr said: Right... I had to think about it for a second but, yuh…you win. Your suck is worse. 42 minutes ago, fortune46x said: I did … just waiting for the confirmation to head to TRF to pick it up and get a black cat burger. Any specs/pics on it yet? Why are these so elusive? Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 22, 2021 Share Posted October 22, 2021 8 hours ago, Palu49 said: @taperk600is almost ready to go up there, I sucked all the ctec2 oil out of the tank and filled it right full of fresh Klotz so it’s race ready for him. And I see you pulled the seat off for weight reduction too........better have snagged that battery out too while you were at it !! 1 Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 22, 2021 Share Posted October 22, 2021 14 hours ago, Crnr2Crnr said: Welcome back T New ride at D&D yet? The Cat forum here could use some beta with the baseline to done hp/Dyno upgrade info if you want to start a fresh thread. Either Monday or Tuesday depending on the weather..... Not sure I'll be posting any dyno stuff.........too much of an ass ache for free information. Let the keyboard jackasses pay for it themselves Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 22, 2021 Author Share Posted October 22, 2021 31 minutes ago, Zambroski said: I had to think about it for a second but, yuh…you win. Your suck is worse. Any specs/pics on it yet? Why are these so elusive? that was all of last season on that rebuild, shot. good to go now, just have to dial in the secondary with the XC helix and spring. because it's a brand new chassis and rear skid... duh. Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 22, 2021 Author Share Posted October 22, 2021 1 minute ago, taperk600 said: Either Monday or Tuesday depending on the weather..... Not sure I'll be posting any dyno stuff.........too much of an ass ache for free information. Let the keyboard jackasses pay for it themselves I get it, but they're enjoyable threads, great information, a plug for D&D and frankly this place needs it - rather than HCS Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 12 minutes ago, taperk600 said: And I see you pulled the seat off for weight reduction too........better have snagged that battery out too while you were at it !! Stick around, Taper! Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 22, 2021 Share Posted October 22, 2021 7 minutes ago, Crnr2Crnr said: I get it, but they're enjoyable threads, great information, a plug for D&D and frankly this place needs it - rather than HCS We'll see............ Never know what might happen..... Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 22, 2021 Author Share Posted October 22, 2021 1 minute ago, taperk600 said: We'll see............ Never know what might happen..... 200hp Quote Link to comment Share on other sites More sharing options...
Palu49 Posted October 22, 2021 Share Posted October 22, 2021 34 minutes ago, taperk600 said: And I see you pulled the seat off for weight reduction too........better have snagged that battery out too while you were at it !! I was wondering if you’d pick up on that! With some triggers it’ll be the ultimate dealer prep shootout sled for this year 🤣 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted October 22, 2021 Share Posted October 22, 2021 Little miffed right meow. I have Enticer parts on order from 4 different places. All for have emailed me or called me this week to let me know my stuff is on backorder and they are only doing ship complete orders. Can't even get partial orders to keep making progress on stuff. Quote Link to comment Share on other sites More sharing options...
fortune46x Posted October 22, 2021 Share Posted October 22, 2021 11 hours ago, Zambroski said: I had to think about it for a second but, yuh…you win. Your suck is worse. Any specs/pics on it yet? Why are these so elusive? I have only seen the pic from haydays. It'll have the adapt clutches carbon fiber tcl , other than that it'll be the same old song and dance I think. They are limited in numbers this year due to covid - that's why it was a race program only sled. 11 hours ago, Crnr2Crnr said: that was all of last season on that rebuild, shot. good to go now, just have to dial in the secondary with the XC helix and spring. because it's a brand new chassis and rear skid... duh. I am sending my clutches to NSP to get the biggest bang for the buck , hes the foremost expert Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 26 minutes ago, fortune46x said: I have only seen the pic from haydays. It'll have the adapt clutches carbon fiber tcl , other than that it'll be the same old song and dance I think. They are limited in numbers this year due to covid - that's why it was a race program only sled. I am sending my clutches to NSP to get the biggest bang for the buck , hes the foremost expert FUck...fleeting pics and specs at best. Is this it? Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 LOl...nevermind. More Blast gay madness. My god. Enough with this fucking thing already. Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 22, 2021 Author Share Posted October 22, 2021 11 hours ago, racinfarmer said: Little miffed right meow. I have Enticer parts on order from 4 different places. All for have emailed me or called me this week to let me know my stuff is on backorder and they are only doing ship complete orders. Can't even get partial orders to keep making progress on stuff. I've had an item shipped from NY being held hostage by USPS in NJ for a week now. 37 minutes ago, fortune46x said: I am sending my clutches to NSP to get the biggest bang for the buck , hes the foremost expert Good call. That'll also save you from having to carry a Sat phone in wolf and polar bear country. Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 AHhh finally found the 2022 RXC! Also...an almost perfect look-a-like to the 21 sitting in my stall. Psst....mine is already better though... Quote Link to comment Share on other sites More sharing options...
fortune46x Posted October 22, 2021 Share Posted October 22, 2021 5 minutes ago, Zambroski said: AHhh finally found the 2022 RXC! Also...an almost perfect look-a-like to the 21 sitting in my stall. Psst....mine is already better though... because yours exists lol. I haven't even started a parts list yet. Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 1 minute ago, fortune46x said: because yours exists lol. I haven't even started a parts list yet. LOL! True dat! Quote Link to comment Share on other sites More sharing options...
fortune46x Posted October 22, 2021 Share Posted October 22, 2021 This one though I am pretty sure is going to be 99% stock, maybe clutched, maybe handlebar control clean up kit , hand guards, skis, then revalve the suspension and let it be. Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 Just now, fortune46x said: This one though I am pretty sure is going to be 99% stock, maybe clutched, maybe handlebar control clean up kit , hand guards, skis, then revalve the suspension and let it be. Mine is staying close to stock too....for resale reasons I guess. Just cleaned up and put some beefier additions that I can remove before sale. Yeah....I'm certainly not used to all this fancy shit on the bars. I'll be moving the kill switch for sure and replacing the 5.5 riser with a 3/3.5. I'm almost sure I'll be building another SX next summer. Trying to decide exactly how much of it I'll build will be the tough part. Quote Link to comment Share on other sites More sharing options...
fortune46x Posted October 22, 2021 Share Posted October 22, 2021 4 minutes ago, Zambroski said: Mine is staying close to stock too....for resale reasons I guess. Just cleaned up and put some beefier additions that I can remove before sale. Yeah....I'm certainly not used to all this fancy shit on the bars. I'll be moving the kill switch for sure and replacing the 5.5 riser with a 3/3.5. I'm almost sure I'll be building another SX next summer. Trying to decide exactly how much of it I'll build will be the tough part. I know a guy selling a roller chassis but he isn't giving me a price (dick) lol Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 41 minutes ago, fortune46x said: I know a guy selling a roller chassis but he isn't giving me a price (dick) lol Yeah…I’m not gonna buy a roller only to end up with 15k plus labor into it. Quote Link to comment Share on other sites More sharing options...
fortune46x Posted October 22, 2021 Share Posted October 22, 2021 41 minutes ago, Zambroski said: Yeah…I’m not gonna buy a roller only to end up with 15k plus labor into it. Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 22, 2021 Share Posted October 22, 2021 11 minutes ago, fortune46x said: Quote Link to comment Share on other sites More sharing options...
Not greg b Posted October 22, 2021 Share Posted October 22, 2021 2 hours ago, Zambroski said: Mine is staying close to stock too....for resale reasons I guess. Just cleaned up and put some beefier additions that I can remove before sale. Yeah....I'm certainly not used to all this fancy shit on the bars. I'll be moving the kill switch for sure and replacing the 5.5 riser with a 3/3.5. I'm almost sure I'll be building another SX next summer. Trying to decide exactly how much of it I'll build will be the tough part. So you are the one posting what’s the best xc can on fb groups Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.