revrnd Posted March 19, 2018 Share Posted March 19, 2018 Last look @ the neighbourhood on the drive home Quote Link to comment Share on other sites More sharing options...
1trailmaker Posted March 19, 2018 Share Posted March 19, 2018 Please beware of a stranded vehicle on the Tops A trail west of the intersection for the A/135 trails at Deep River. We are trying to locate the owner in order to make arrangements to have it removed. Quote Link to comment Share on other sites More sharing options...
Poncho Posted March 19, 2018 Share Posted March 19, 2018 (edited) Saw a few 4 wheelers this weekend that had cut up some great trails. Looks like there are couple more weekends at my place, conditions have not been better. Edited March 19, 2018 by Poncho 1 Quote Link to comment Share on other sites More sharing options...
StevieWonder Posted March 20, 2018 Share Posted March 20, 2018 7 hours ago, 1trailmaker said: Please beware of a stranded vehicle on the Tops A trail west of the intersection for the A/135 trails at Deep River. We are trying to locate the owner in order to make arrangements to have it removed. Nice 3 point turn ....... 1 1 Quote Link to comment Share on other sites More sharing options...
revrnd Posted March 20, 2018 Share Posted March 20, 2018 19 hours ago, 1trailmaker said: Please beware of a stranded vehicle on the Tops A trail west of the intersection for the A/135 trails at Deep River. We are trying to locate the owner in order to make arrangements to have it removed. Trans X driver on his day off? 1 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Blackstar Posted March 22, 2018 Platinum Contributing Member Share Posted March 22, 2018 1 2 1 Quote Link to comment Share on other sites More sharing options...
Taillight Posted March 23, 2018 Share Posted March 23, 2018 Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer Quote Link to comment Share on other sites More sharing options...
ArcticCrusher Posted March 23, 2018 Share Posted March 23, 2018 21 minutes ago, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer I think I still have the original off the formula deluxe. Free if you want it. Quote Link to comment Share on other sites More sharing options...
02sled Posted March 23, 2018 Share Posted March 23, 2018 (edited) 36 minutes ago, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer Take a look at TSC stores and their stall mats. Especially when they are on sale. Heavy duty thick rubber easily cut into 16" wide strips and screwed down. They aren't on sale right now but do go on sale regularly. One 6 foot long mat gives you 18 feet of 16 inch wide matting. http://www.tscstores.com/4-X-6-X-34-RUBBER-STALL-MAT-P14214.aspx Or there is the 5 X 7 http://www.tscstores.com/5-X-7-X-12-HORSE-TRAILER-MAT-P14215.aspx Edited March 23, 2018 by 02sled Quote Link to comment Share on other sites More sharing options...
smokin george Posted March 23, 2018 Share Posted March 23, 2018 I used the stall mat from TSC as well. Easy to cut Quote Link to comment Share on other sites More sharing options...
smokin george Posted March 23, 2018 Share Posted March 23, 2018 3 hours ago, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer System Fence on Hwy 7 just west of Acton usually has a good price on the stall mats Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Blackstar Posted March 24, 2018 Platinum Contributing Member Share Posted March 24, 2018 (edited) 9 hours ago, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer I just threw out a 4x8 sheet of rubber mat that I lined my trailer with. (its the flooring they lay down at ice rinks). I cut it up with a circular saw. Should have asked last week.....lol Edited March 24, 2018 by Blackstar Quote Link to comment Share on other sites More sharing options...
02sled Posted March 24, 2018 Share Posted March 24, 2018 The stall mats can be cut with a circular saw, a jig saw or a box cutter. I've used each. With a saw I put 2 X 4's under the mat either side of the cut line and ran the saw along a straight edge. One time when I didn't have 2 X 4's handy I tried the box cutter along a straight edge. With a fresh blade you're through in a few passes. I suggest using stainless screws and washers to hold it down. Quote Link to comment Share on other sites More sharing options...
Stoney Posted March 24, 2018 Share Posted March 24, 2018 King City Trailers on King rd usually have a large stack of bed liners out back. The mats are good too, just not free and they are actually heavier too. Quote Link to comment Share on other sites More sharing options...
Puzzleboy Posted March 24, 2018 Share Posted March 24, 2018 Do they sell them, or give them away? 5 hours ago, Stoney said: King City Trailers on King rd usually have a large stack of bed liners out back. The mats are good too, just not free and they are actually heavier too. Quote Link to comment Share on other sites More sharing options...
Stoney Posted March 24, 2018 Share Posted March 24, 2018 1 hour ago, Puzzleboy said: Do they sell them, or give them away? I do not actually know, just recall seeing a pile of them stacked up out back whenever I have been there.....guess would not hurt to inquire. Considering their business, people may not expect them to have them, but they install some sort of spray bed liner. Quote Link to comment Share on other sites More sharing options...
revrnd Posted March 25, 2018 Share Posted March 25, 2018 (edited) Did a daytrip to Barrie to look @ the new sleds & talked to some sledders. A couple that I haven't seen in several years. Picked up a new trail cam @ Cabela's & then dealt w/ the traffic in that area. Now I know why it's been several years since I've been to Barrie. The season is done for me other than some tinkering w/ the sled before putting the cover on it. Considering how shitty the season was in D2 (two rides on the REV, 4 rides on the Blizzard), I could've wrote off the winter. As it was the 2 trips north to Timmins & Kap (w/ a new sled) made up for the ill-fated trip from Kirkland Lake. Ended up w/ 2065 klicks or 1259 miles on the new sled. Edited March 25, 2018 by revrnd 1 Quote Link to comment Share on other sites More sharing options...
ArcticCrusher Posted March 25, 2018 Share Posted March 25, 2018 11 hours ago, Stoney said: I do not actually know, just recall seeing a pile of them stacked up out back whenever I have been there.....guess would not hurt to inquire. Considering their business, people may not expect them to have them, but they install some sort of spray bed liner. They sell and install a number of cabs for trucks so not surprised. Quote Link to comment Share on other sites More sharing options...
Pete Z Posted March 25, 2018 Share Posted March 25, 2018 On 23/03/2018 at 4:06 PM, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer If you inquire nicely at Fenner Dunlop in Bracebridge they will usually give you a chunk of rubber belting that works great for traction mats in a trailer. They make conveyor belts for the mining industry and often have blems or off-cuts that they throw away. Two words of caution though. The stuff is incredibly thick and heavy so resist the urge to cover the entire trailer deck even if they give you enough to do it. Also being that it is conveyor belt meant for ore is it smooth and high-durometer rubber so unstudded sleds are prone to spin on it. Quote Link to comment Share on other sites More sharing options...
Srxfasterapex Posted March 25, 2018 Share Posted March 25, 2018 11 hours ago, revrnd said: Did a daytrip to Barrie to look @ the new sleds & talked to some sledders. A couple that I haven't seen in several years. Picked up a new trail cam @ Cabela's & then dealt w/ the traffic in that area. Now I know why it's been several years since I've been to Barrie. The season is done for me other than some tinkering w/ the sled before putting the cover on it. Considering how shitty the season was in D2 (two rides on the REV, 4 rides on the Blizzard), I could've wrote off the winter. As it was the 2 trips north to Timmins & Kap (w/ a new sled) made up for the ill-fated trip from Kirkland Lake. Ended up w/ 2065 klicks or 1259 miles on the new sled. What sleds did they have in Barrie, and what did you think of them? Quote Link to comment Share on other sites More sharing options...
revrnd Posted March 25, 2018 Share Posted March 25, 2018 1 hour ago, Srxfasterapex said: What sleds did they have in Barrie, and what did you think of them? I wasnt really looking. Mostly long tracks. I dont think they had a Gen4 version of the Blizzard. The new blue looks like a Mikita tool. The red looked like it should be a bit glossy as opposed to the dull look. I thought the new plastic on the 4 strokes looked OK. Quote Link to comment Share on other sites More sharing options...
1trailmaker Posted March 25, 2018 Share Posted March 25, 2018 (edited) never mind lol Edited March 25, 2018 by 1trailmaker Quote Link to comment Share on other sites More sharing options...
Stoney Posted March 25, 2018 Share Posted March 25, 2018 10 hours ago, ArcticCrusher said: They sell and install a number of cabs for trucks so not surprised. Yep, that has been my primary reason for dealing with them. Quote Link to comment Share on other sites More sharing options...
revrnd Posted April 4, 2018 Share Posted April 4, 2018 On 3/23/2018 at 4:06 PM, Taillight said: Does anyone have a few used old, dead or ripped tracks for the inside of a trailer for sale? what about an old truck bed liner? close to the GTA I need to do the inside of a new trailer Have you asked @ any dealers? Quote Link to comment Share on other sites More sharing options...
dirtybeacher Posted April 6, 2018 Author Share Posted April 6, 2018 Wtf is with this weather? Just got back from 2 weeks down south. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.