sleepybrew Posted April 24, 2023 Share Posted April 24, 2023 4 minutes ago, stinkipinki said: My 09 was a great trail sled, horrid ditch banger. I'm 6'2 240 lbs and in pretty good shape, and its a workout for sure. But on a trail or even on some crossover stuff if it wasn't too deep, great sled. My 09 was picked, piped and clutched and from a dig it would stand right up in a wheelie. that engine sings a great song Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted April 24, 2023 Author Share Posted April 24, 2023 10 hours ago, Crnr2Crnr said: low-ball this outdated sleigh I'm told I'm maxed out on how many RXC's I'm allowed to have. There were 5 in the shop at one point this winter. 9 hours ago, stinkipinki said: You want an 09 or newer. And you want an XTX. The 09's have the updated front geometry. The XTX is a 144 with a tipped rail and is the best setup/balance for this sled. The short track is too stubby with all of the front end weight, and the MTX is way too long for a sled like this. 09+ XTX or bust. He found a nice 09 XTX for $3500. I told him if he is serious about it, he needs to shit or get off the pot this last weekend. Guess what sold this weekend while he was hemming and hawing... 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted April 24, 2023 Share Posted April 24, 2023 1 hour ago, racinfarmer said: I'm told I'm maxed out on how many RXC's I'm allowed to have. There were 5 in the shop at one point this winter. picking up an RXC with a brand new engine and box full of blown up engine on Saturday... we're going to be about equal to Zacks thanks to piss poor QC at the engine plant. Sigh... Going to keep the good jug/piston as spares, sending the crank off to friend in PA so if there's anything you need or want for spares from that mess lmk. IDK what the case halves look like yet but they might go to J in PA as well. my brother would have been $ ahead buying Herf's at this point... but that's sledding Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted April 25, 2023 Author Share Posted April 25, 2023 Ummm, is it a 2015? Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted April 25, 2023 Share Posted April 25, 2023 7 minutes ago, racinfarmer said: Ummm, is it a 2015? 2021... Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted April 25, 2023 Author Share Posted April 25, 2023 17 minutes ago, Crnr2Crnr said: 2021... The 2015 went down the road with a almost new motor, the old motor in a box, and pretty much everything you'd need to ice race or terrain race/trail ride it. Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted April 25, 2023 Share Posted April 25, 2023 1 minute ago, racinfarmer said: The 2015 went down the road with a almost new motor, the old motor in a box, and pretty much everything you'd need to ice race or terrain race/trail ride it. jus pm me if you need anything... it won't be going anywhere until Feb at the soonest. Quote Link to comment Share on other sites More sharing options...
mnstang Posted April 25, 2023 Share Posted April 25, 2023 4 hours ago, racinfarmer said: I'm told I'm maxed out on how many RXC's I'm allowed to have. There were 5 in the shop at one point this winter. He found a nice 09 XTX for $3500. I told him if he is serious about it, he needs to shit or get off the pot this last weekend. Guess what sold this weekend while he was hemming and hawing... Maybe introduce him to not being gay and get him into a Jag. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted April 25, 2023 Author Share Posted April 25, 2023 20 hours ago, mnstang said: Maybe introduce him to not being gay and get him into a Jag. I'll make sure to mention it. 1 Quote Link to comment Share on other sites More sharing options...
Not greg b Posted April 26, 2023 Share Posted April 26, 2023 On 4/24/2023 at 6:41 PM, Crnr2Crnr said: picking up an RXC with a brand new engine and box full of blown up engine on Saturday... we're going to be about equal to Zacks thanks to piss poor QC at the engine plant. Sigh... Going to keep the good jug/piston as spares, sending the crank off to friend in PA so if there's anything you need or want for spares from that mess lmk. IDK what the case halves look like yet but they might go to J in PA as well. my brother would have been $ ahead buying Herf's at this point... but that's sledding They have a catalyst on their floor right now. I am trying to encourage them to get out the 5 gallon bucket and wheelie skis Quote Link to comment Share on other sites More sharing options...
Not greg b Posted April 26, 2023 Share Posted April 26, 2023 On 4/24/2023 at 5:13 PM, racinfarmer said: I'm told I'm maxed out on how many RXC's I'm allowed to have. There were 5 in the shop at one point this winter. He found a nice 09 XTX for $3500. I told him if he is serious about it, he needs to shit or get off the pot this last weekend. Guess what sold this weekend while he was hemming and hawing... Any sled that is decent for 3500 is a good deal right now Quote Link to comment Share on other sites More sharing options...
Deephaven Posted April 26, 2023 Share Posted April 26, 2023 4 minutes ago, Not greg b said: Any sled that is decent for 3500 is a good deal right now Everything but a nytro. 1 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted April 26, 2023 Share Posted April 26, 2023 6 hours ago, Deephaven said: Everything but a nytro. or a Rush Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted April 30, 2023 Author Share Posted April 30, 2023 Update: He got a 01 Edge X 600 with a stud through the cooler and has been HAMMERED on. Poor kid... Quote Link to comment Share on other sites More sharing options...
Bontz Posted April 30, 2023 Share Posted April 30, 2023 Just now, racinfarmer said: Update: He got a 01 Edge X 600 with a stud through the cooler and has been HAMMERED on. Poor kid... I hope he didn't pay $3500 for it!! Get it fixed up, and that's not a horrible sled for an ass dragger. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted May 1, 2023 Author Share Posted May 1, 2023 15 minutes ago, Bontz said: I hope he didn't pay $3500 for it!! Get it fixed up, and that's not a horrible sled for an ass dragger. $800 with two new pistons and a bunch of bearings in a box. Needs a skid and the cooler welded up for sure. Quote Link to comment Share on other sites More sharing options...
mnstang Posted May 1, 2023 Share Posted May 1, 2023 16 hours ago, racinfarmer said: Update: He got a 01 Edge X 600 with a stud through the cooler and has been HAMMERED on. Poor kid... Buddy of mine is Polaris guy and has had a number of the edges and pro-x's, maybe it's bad luck but they are always breaking and they don't perform like what they should. He finally wants to ditch all of them and get the newer chassis with no trailing arms I think it's an IQ chassis. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted June 24, 2023 Author Share Posted June 24, 2023 The high mile 2012 Nytro is down to $2100. I told the guy to offer up $1500 no questions asked and we'll get it tore apart for a Princeton/Haydays parts list. A few too many beers this afternoon, I might need to offer up like $1200 for it. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.