Guest Posted December 20, 2018 Share Posted December 20, 2018 2 hours ago, f7ben said: That's what the whole bet is you fucking brain dead retarded faggot fucking midget. The circumference does not impact the drive ratio 1 bit. Its irrelevant you fucking moron. You are dumber than fuck. I don't think it's an act. You may be the dumbest cock hound on the net You fukken faggot, I've turned-down better broads than you've had. Go fuck yourself, you fukken TROLL Bastard! i KNEW YOU'D FLAKE, YOU FUKKER. WASTING MY TIME, making me write Cos, and do the garage demo. You're all a bunch of fucktards. When any of you get some brains, or money, let me know faggots. Then we can get this settled. You fukken bitch fuck, I bet you ain't got 5000 in your checking account, do ya' loser!!! fUCK OFF LOSER!!!!! Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Highmark Posted December 20, 2018 Platinum Contributing Member Share Posted December 20, 2018 4 hours ago, Polaris 550 said: The final drive does NOT take place at the driver. The track is the FINAL component of a snowmobile POWER TRAIN. Just like a TIRE is the final component of a Motor vehicle. WHY DON'T you guys want my money!!!!!!!!!!!!!!!!!!!!!!! You saw how much I had in my fukken checking account, so why don't you stand up to me, and take that 20Gs? Inside of the track not the outside you fucking idiot. Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Highmark Posted December 20, 2018 Platinum Contributing Member Share Posted December 20, 2018 4 hours ago, Rod Johnson said: Gets more circular the faster you go Around the drivers.....why? Quote Link to comment Share on other sites More sharing options...
Guest Posted December 20, 2018 Share Posted December 20, 2018 2 hours ago, Highmark said: Inside of the track not the outside you fucking idiot. You dumb fuck. Put your money where your cock-smoker is. Quote Link to comment Share on other sites More sharing options...
JEFF Posted December 20, 2018 Share Posted December 20, 2018 58 minutes ago, Polaris 550 said: You dumb fuck. Put your money where your cock-smoker is. Do you even have 20K left after the last month?? Quote Link to comment Share on other sites More sharing options...
Guest Posted December 20, 2018 Share Posted December 20, 2018 7 minutes ago, JEFF said: Do you even have 20K left after the last month?? I ain't got a pot to piss in, or a window to throw it out!! Quote Link to comment Share on other sites More sharing options...
The One Posted December 21, 2018 Share Posted December 21, 2018 1 hour ago, Polaris 550 said: I ain't got a pot to piss in, or a window to throw it out!! And you don't LOSER Quote Link to comment Share on other sites More sharing options...
Guest Posted December 21, 2018 Share Posted December 21, 2018 8 minutes ago, The One said: And you don't LOSER Don't what, faggot? Quote Link to comment Share on other sites More sharing options...
The One Posted December 21, 2018 Share Posted December 21, 2018 (edited) 13 minutes ago, Polaris 550 said: Don't what, faggot? Have money ,homo Edited December 21, 2018 by The One Quote Link to comment Share on other sites More sharing options...
The One Posted December 21, 2018 Share Posted December 21, 2018 5 hours ago, Polaris 550 said: You fukken faggot, I've turned-down better broads than you've had. Go fuck yourself, you fukken TROLL Bastard! i KNEW YOU'D FLAKE, YOU FUKKER. WASTING MY TIME, making me write Cos, and do the garage demo. You're all a bunch of fucktards. When any of you get some brains, or money, let me know faggots. Then we can get this settled. You fukken bitch fuck, I bet you ain't got 5000 in your checking account, do ya' loser!!! fUCK OFF LOSER!!!!! Grow up act your age !!! Quote Link to comment Share on other sites More sharing options...
Guest Posted December 21, 2018 Share Posted December 21, 2018 (edited) 2 hours ago, The One said: Have money ,homo 2 hours ago, The One said: Grow up act your age !!! Shut up, " SITE TEEN-FAG " !! LMAO!! You're the site school faggot!! How many cocks did you suck at recess today? Edited December 21, 2018 by Guest Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member ViperGTS/Z1 Posted December 21, 2018 Platinum Contributing Member Share Posted December 21, 2018 12 hours ago, ckf said: I'm no engineer, but it appears s though you two are talking about two different things. @f7ben is talking about the final drive on a snowmobile and @Polaris 550 is talking about the lug heights effect on one turn of the track. The final drive takes pl;ace at the driver, the track doesn't have a thing to do with it. Sorry uncle naughty, bipolarhooknosedfag is correct as far as final drive on a snowmobile. Damn, I feel dirty for agreeing with Bhen. That's exactly what I was saying...the larger diameter track with the longer lugs will rotate further than the 1 inch lug when the TRACK has rotated 1 full turn if marked from the outside. The secondary will have to turn slightly more on the 3 inch lug vs the 1 inch lug to complete the full 1 turn of track. Yet there are still some saying thats incorrect. Its a continuous loop much like a tire....doesn't matter if its round or elongated. ....the larger diameter goes further on 1 full rotation.....sheesh 2 Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 21, 2018 Author Share Posted December 21, 2018 1 minute ago, ViperGTS/Z1 said: That's exactly what I was saying...the larger diameter track with the longer lugs will rotate further than the 1 inch lug when the TRACK has rotated 1 full turn if marked from the outside. The secondary will have to turn slightly more on the 3 inch lug vs the 1 inch lug to complete the full 1 turn of track. Yet there are still some saying thats incorrect. Its a continuous loop much like a tire....doesn't matter if its round or elongated. ....the larger diameter goes further on 1 full rotation.....sheesh Wrong 1 Quote Link to comment Share on other sites More sharing options...
Rod Posted December 21, 2018 Share Posted December 21, 2018 Been got owned Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 21, 2018 Author Share Posted December 21, 2018 10 minutes ago, Rod Johnson said: Been got owned Yup..znutty never pays me 1 Quote Link to comment Share on other sites More sharing options...
Beavis and Butt-Head Posted December 21, 2018 Share Posted December 21, 2018 Hey viper , are you same guy on a Anandtech forums ? A lot of good info over there but if it’s not you then just forget what I said Quote Link to comment Share on other sites More sharing options...
jammin Posted December 21, 2018 Share Posted December 21, 2018 5 hours ago, f7ben said: Wrong Viper is correct. Quote Link to comment Share on other sites More sharing options...
jammin Posted December 21, 2018 Share Posted December 21, 2018 Nice work @NaturallyAspirated 1 Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 21, 2018 Author Share Posted December 21, 2018 5 minutes ago, jammin said: Viper is correct. You should probably avoid these thread being it took you forever to actually get it Quote Link to comment Share on other sites More sharing options...
jammin Posted December 21, 2018 Share Posted December 21, 2018 I get it and Neal and Viper are correct...... so...... Quote Link to comment Share on other sites More sharing options...
motonoggin Posted December 21, 2018 Share Posted December 21, 2018 1 minute ago, jammin said: I get it and Neal and Viper are correct...... so...... Stop Quote Link to comment Share on other sites More sharing options...
jammin Posted December 21, 2018 Share Posted December 21, 2018 No Quote Link to comment Share on other sites More sharing options...
motonoggin Posted December 21, 2018 Share Posted December 21, 2018 6 hours ago, ViperGTS/Z1 said: That's exactly what I was saying...the larger diameter track with the longer lugs will rotate further than the 1 inch lug when the TRACK has rotated 1 full turn if marked from the outside. The secondary will have to turn slightly more on the 3 inch lug vs the 1 inch lug to complete the full 1 turn of track. Yet there are still some saying thats incorrect. Its a continuous loop much like a tire....doesn't matter if its round or elongated. ....the larger diameter goes further on 1 full rotation.....sheesh It matters because it's not rotational movement, it's linear. Yes, a deeper lug track has a longer outer perimeter than a short lug track, but it doesn't matter because of the type of motion. Rotational vs linear. Quote Link to comment Share on other sites More sharing options...
Snoslinger Posted December 21, 2018 Share Posted December 21, 2018 (edited) 7 hours ago, ViperGTS/Z1 said: That's exactly what I was saying...the larger diameter track with the longer lugs will rotate further than the 1 inch lug when the TRACK has rotated 1 full turn if marked from the outside. The secondary will have to turn slightly more on the 3 inch lug vs the 1 inch lug to complete the full 1 turn of track. Yet there are still some saying thats incorrect. Its a continuous loop much like a tire....doesn't matter if its round or elongated. ....the larger diameter goes further on 1 full rotation.....sheesh Ugggh , here I thought you had it. Take an old clutch belt and put nails in it every inch or so. Then compresss it a bit, put a mark on the side of the belt, and move it down a bench. If you still can’t see what is going on, repeat it with the nails out. The track will go the same distance each time. Edited December 21, 2018 by Snoslinger Quote Link to comment Share on other sites More sharing options...
Snoslinger Posted December 21, 2018 Share Posted December 21, 2018 was the speed of the stud tip on the flat portion of the track vs going around the axle wheel brought up yet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.