Tommcat Posted November 5, 2022 Share Posted November 5, 2022 2 hours ago, Crnr2Crnr said: what are these hoods you speak of ? seriously, who does a good job of making pipes these days? even if just copying a stock system that requires replacement that's NLA and ceramic coating it Jaws fit is everything you could ask for 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2022 Share Posted November 5, 2022 38 minutes ago, Badger** said: If you read the article he said someday we would be doing some clutch testing but we never got around to it was just not in the cards, when there was snow I was out riding. Stock clutch setup with two-stage Springs. It didn't over rev the stock clutching?What spring rates? Couldn't have been any softer than stock. Sounds like the pipe didn't work very well. Edit:Nevermind it only made 3.6hp at DT Quote Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2022 Share Posted November 5, 2022 26 minutes ago, Tommcat said: Jaws fit is everything you could ask for Do you see good gains with them too? Quote Link to comment Share on other sites More sharing options...
Tommcat Posted November 5, 2022 Share Posted November 5, 2022 15 minutes ago, HSR said: Do you see good gains with them too? Depends on the sled. Most new sleds are only small gains, 5 to 10 maybe. The manufacturers dont leave big power on the table like they used to. 1 Quote Link to comment Share on other sites More sharing options...
Badger** Posted November 5, 2022 Share Posted November 5, 2022 42 minutes ago, HSR said: It didn't over rev the stock clutching?What spring rates? Couldn't have been any softer than stock. Sounds like the pipe didn't work very well. Edit:Nevermind it only made 3.6hp at DT The fuel controller helped, the pipe alone was not so much and thats what Jim at DT fig at the time also way before he did any testing on the 800 pipes. RPM a was at @8100 for 164ish hp spring rate I would have to look it up. Edit:Nevermind >>>> The sled still walked any stock 850 P or D in 800', not by much but still. <<<< No titanium wrist pins for me!! Worked for me and that's all that matters. Quote Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2022 Share Posted November 5, 2022 48 minutes ago, Badger** said: RPM a was at @8100 for 164ish hp spring rate I would have to look it up. Please do and I’m not familiar hp spring rates? Can you elaborate a bit for us guys that aren’t as knowledgeable? So Olav used the fuel controller to control over rev? Cool. You guys figure 14hp total gains over stock ? Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 Look who’s here! Quote Link to comment Share on other sites More sharing options...
Tommcat Posted November 6, 2022 Share Posted November 6, 2022 24 minutes ago, HSR said: Look who’s here! Those guys are assholes 3 Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 Just now, Tommcat said: Those guys are assholes Quote Link to comment Share on other sites More sharing options...
Badger** Posted November 6, 2022 Share Posted November 6, 2022 52 minutes ago, HSR said: Please do and I’m not familiar hp spring rates? Can you elaborate a bit for us guys that aren’t as knowledgeable? So Olav used the fuel controller to control over rev? Cool. You guys figure 14hp total gains over stock ? Look it up its all in Am Snow Mag 2016. Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 14 minutes ago, Badger** said: Look it up its all in Am Snow Mag 2016. So you have no idea is what you’re saying. It’s ok to admit it . Quote Link to comment Share on other sites More sharing options...
Badger** Posted November 6, 2022 Share Posted November 6, 2022 3 minutes ago, HSR said: So you have no idea is what you’re saying. It’s ok to admit it . So you admit it, you don't know and you never read the article. Got it now. Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 3 minutes ago, Badger** said: So you admit it, you don't know and you never read the article. Got it now. Well I just figured the sled owner would know that’s all. Sorry for asking. Quote Link to comment Share on other sites More sharing options...
Tommcat Posted November 6, 2022 Share Posted November 6, 2022 1 hour ago, HSR said: Well I just figured the sled owner would know that’s all. Sorry for asking. That would seem logical 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 12 minutes ago, Tommcat said: That would seem logical It would but as you saw,, I got . Kinda weird he brings his sled up but won’t answer questions Quote Link to comment Share on other sites More sharing options...
Tommcat Posted November 6, 2022 Share Posted November 6, 2022 10 minutes ago, HSR said: It would but as you saw,, I got . Kinda weird he brings his sled up but won’t answer questions I know i dont ever mind talking about what i did on my sleds. Im always happy to talk shop Quote Link to comment Share on other sites More sharing options...
Guest Posted November 6, 2022 Share Posted November 6, 2022 3 minutes ago, Tommcat said: I know i dont ever mind talking about what i did on my sleds. Im always happy to talk shop Me too, I thought that's why we hang out on sled forums. But then again you and I have never had a sled mag do a write up on our sleds. It's our bad for not having read the magazine Quote Link to comment Share on other sites More sharing options...
fortune46x Posted November 6, 2022 Share Posted November 6, 2022 On 11/5/2022 at 12:59 PM, Crnr2Crnr said: @fortune46x could learn A LOT from that guy! jesus... that guy is a dufus he likes to flap his gums over ISR as well. Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 6, 2022 Share Posted November 6, 2022 3 minutes ago, fortune46x said: jesus... that guy is a dufus he likes to flap his gums over ISR as well. I like how there's all kinds of background noise in his shop so you can't hear all his trash talking Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 6, 2022 Share Posted November 6, 2022 On 11/3/2022 at 3:23 PM, Doug said: Send the sled to Bikeman it will gain 20 hp just by driving it though the door. https://www.hardcoresledder.com/threads/the-boost-trail-sled-is-180hp.1887618/post-20696041 you nailed it... Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted November 13, 2022 Share Posted November 13, 2022 On 11/2/2022 at 4:44 PM, krom said: Fully broken while loaded, the boost makes 183 at DTR, FWIW the 998 T made 211 there. Its going to take some mods for pooto have any chance keeping up with either of the the procross twins in stock form, on the lake.... But it will make that same 183 at elevation. 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 13, 2022 Share Posted November 13, 2022 13 minutes ago, Ez ryder said: But it will make that same 183 at elevation. which doesn't matter because who rides a pig heavy 4S at elevation. I give BRP and Polaris credit for having factory 2S mountain sleds and Poo a fist bump for a flatlander version. Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted November 13, 2022 Share Posted November 13, 2022 18 minutes ago, Crnr2Crnr said: which doesn't matter because who rides a pig heavy 4S at elevation. I give BRP and Polaris credit for having factory 2S mountain sleds and Poo a fist bump for a flatlander version. The rmk boost is not a 4st? What are you talking about Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 13, 2022 Share Posted November 13, 2022 2 minutes ago, Ez ryder said: The rmk boost is not a 4st? What are you talking about I know it is. I thought you were comparing the Yamacats to the Boost Oops Quote Link to comment Share on other sites More sharing options...
Gym Ramstud Posted November 17, 2022 Share Posted November 17, 2022 On 11/3/2022 at 9:32 PM, HSR said: Ok Z Gym isn't certain what's so funny. Gym hasn't been here for a while. Gym's Commodore 64 was on the fritz again. Gym had to get a transistor from Uzbekistan. Gym starts with a G. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.