Badger** Posted March 7, 2023 Share Posted March 7, 2023 1 minute ago, HSR said: Sorry I'll never change. I just think most members are tired of you trying to "own" me and totally fucking threads up like last night. GS can handle himself he doesn't need you. In fact nobody on FS needs you. Hey pal but I do have more than a few friends on here from the other side, In fact!! But still, you're just a washed-up has-been mod that trolls the internet all day long, in fact!! Quote Link to comment Share on other sites More sharing options...
hayward Posted March 7, 2023 Share Posted March 7, 2023 7 minutes ago, HSR said: Not nearly enough studs IMHO. About 50% more for that hp. Did you miss the tobacco pipe laying on the side of the pickup in the picture? 120 will most likely be adaquete for the man. GS you shoulda dropped her off behind Hudon's, road down below the gas station for a mile or two and let her stretch her legs out in the hayfields on the west side of Route 8. Blow the carbon out of her! 2 Quote Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2023 Share Posted March 7, 2023 Just now, hayward said: Did you miss the tobacco pipe laying on the side of the pickup in the picture? 120 will most likely be adaquete for the man. I didn't want to be the one to mention it!! No shit Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 7, 2023 Author Share Posted March 7, 2023 13 hours ago, HSR said: Not nearly enough studs IMHO. About 50% more for that hp. Yeah I know that's why I bought 153 Quote Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2023 Share Posted March 7, 2023 Just now, GreenStreak said: Yeah I know that's why I bought 153 What brand of studs and backers did you go with? 1.450's or longer? Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 7, 2023 Share Posted March 7, 2023 19 hours ago, stinkipinki said: The F1000 overheats, and its not any faster then the HO 800 they released in 2010 with the updated tunnel. I wouldn't throw money at one. You’re a fucking idiot 4 Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 7, 2023 Share Posted March 7, 2023 That’s just a great sled GS , very nice. 2 Quote Link to comment Share on other sites More sharing options...
Jerry 976 Posted March 7, 2023 Share Posted March 7, 2023 1 Quote Link to comment Share on other sites More sharing options...
Mainecat Posted March 7, 2023 Share Posted March 7, 2023 Nice sled. You won’t be sorry. Barney’s are awesome. 1 1 Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 7, 2023 Author Share Posted March 7, 2023 4 hours ago, HSR said: What brand of studs and backers did you go with? 1.450's or longer? Woody's I went to their website to see what they recommended for my year make and model and that's what they came up with. the studs are 1.325. Then I went on eBay and got them way cheaper with aluminum backers and Tall nuts 4 hours ago, f7ben said: That’s just a great sled GS , very nice. Thanks buddy 3 hours ago, Mainecat said: Nice sled. You won’t be sorry. Barney’s are awesome. I know I had a f8 before this one and I loved it Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 7, 2023 Author Share Posted March 7, 2023 I gave it a complete look over and the only thing I see wrong somebody has sealer on the EFI mounting flanges so I ordered two new ones from ebay they were 80 bucks Quote Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2023 Share Posted March 7, 2023 20 minutes ago, GreenStreak said: Woody's I went to their website to see what they recommended for my year make and model and that's what they came up with. the studs are 1.325. Then I went on eBay and got them way cheaper with aluminum backers and Tall nuts I don't think the cobra was stock for those years/models was it? Those studs are too short really and won't give you the full benefit of studs. IMHO 1.450's at a minimum, that's what I run in a 1.25 Rip2.If you're going to stud(which I always do) you may as well do it right or you'll get a false sense of confidence. Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 13, 2023 Author Share Posted March 13, 2023 Had the first ride today it was only about 60 miles due to no snow up towards town of Ohio. It needs clutch work hearing a low tone whine when sitting still while it's running. Clutch likes to back shift a little soon while coasting so I'm assuming the primary needs work. Other than that it runs pretty good and rides well Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Steve753 Posted March 13, 2023 Platinum Contributing Member Share Posted March 13, 2023 6 minutes ago, GreenStreak said: Had the first ride today it was only about 60 miles due to no snow up towards town of Ohio. It needs clutch work hearing a low tone whine when sitting still while it's running. Clutch likes to back shift a little soon while coasting so I'm assuming the primary needs work. Other than that it runs pretty good and rides well Get yourself a PB 80 primary. Quote Link to comment Share on other sites More sharing options...
Guest Posted March 13, 2023 Share Posted March 13, 2023 9 minutes ago, GreenStreak said: Had the first ride today it was only about 60 miles due to no snow up towards town of Ohio. It needs clutch work hearing a low tone whine when sitting still while it's running. Clutch likes to back shift a little soon while coasting so I'm assuming the primary needs work. Other than that it runs pretty good and rides well Backshift= secondary. If you're coasting below engagement the primary has released already. Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Steve753 Posted March 13, 2023 Platinum Contributing Member Share Posted March 13, 2023 @HSRyou don't like PB 80s Quote Link to comment Share on other sites More sharing options...
Guest Posted March 13, 2023 Share Posted March 13, 2023 39 minutes ago, Steve753 said: @HSRyou don't like PB 80s Only if calibrated by Northstar Rick, then they're good for 7-9mph in the first 60ft where races are won and lost Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Steve753 Posted March 13, 2023 Platinum Contributing Member Share Posted March 13, 2023 9 minutes ago, HSR said: Only if calibrated by Northstar Rick, then they're good for 7-9mph in the first 60ft where races are won and lost I'm not privy to that info. Always been a good replacement when I've used them. Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 13, 2023 Author Share Posted March 13, 2023 10 hours ago, HSR said: Backshift= secondary. If you're coasting below engagement the primary has released already. No shit. Quote Link to comment Share on other sites More sharing options...
GreenStreak Posted March 13, 2023 Author Share Posted March 13, 2023 10 hours ago, Steve753 said: Get yourself a PB 80 primary. Don't need it. 1 Quote Link to comment Share on other sites More sharing options...
Guest Posted March 13, 2023 Share Posted March 13, 2023 2 hours ago, GreenStreak said: No shit. Well you seemed confused by what you posted. Did you get the proper studs for it? Quote Link to comment Share on other sites More sharing options...
Jerry 976 Posted March 13, 2023 Share Posted March 13, 2023 (edited) Edited March 13, 2023 by Jerry 976 Quote Link to comment Share on other sites More sharing options...
Guest Posted March 17, 2023 Share Posted March 17, 2023 So @GreenStreak how about some pics of your stud pattern ?? I'd like to see how much stud penetration you have. What did you do to the clutching so far to correct your situation ? Quote Link to comment Share on other sites More sharing options...
Badger** Posted March 17, 2023 Share Posted March 17, 2023 Nice job GS. Quote Link to comment Share on other sites More sharing options...
Guest Posted March 17, 2023 Share Posted March 17, 2023 43 minutes ago, Badger** said: Nice job GS. Will you quit following me around already or do you want another beating? You're fucking up another sled thread Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.