Anler Posted December 28, 2018 Share Posted December 28, 2018 2 hours ago, f7ben said: On my big triple I used a secondary brace and additional torque stop and aligned as close to neutral as I could with the tools I had. On the turbo I installed the STM engine plate and as soon as I get my hands on a proper tool I'll shim the motor close to neutral. Do the rigid mounts make the vibration bad? Quote Link to comment Share on other sites More sharing options...
f7ben Posted December 28, 2018 Share Posted December 28, 2018 1 hour ago, Anler said: Do the rigid mounts make the vibration bad? I dont have enough miles on the turbo to tell if it added vibes or not ...they are pretty smooth motors to start with On the triple you would never be able to tell....they are etec smooth ....I suppose having a massive balance shaft helps lolz Quote Link to comment Share on other sites More sharing options...
Rod Posted December 29, 2018 Author Share Posted December 29, 2018 2 hours ago, f7ben said: I dont have enough miles on the turbo to tell if it added vibes or not ...they are pretty smooth motors to start with On the triple you would never be able to tell....they are etec smooth ....I suppose having a massive balance shaft helps lolz Triples is so good! Quote Link to comment Share on other sites More sharing options...
awful knawful Posted December 29, 2018 Share Posted December 29, 2018 9 hours ago, Rod Johnson said: Triples is so good! Yes 900 ace tripple ......smoooooth Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.