racerdave
-
Posts
313 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by racerdave
-
Yes the Indy has a front cooler. 2 tunnel coolers and a under tunnel crossover between the coolers at the rear. Indys are Pro R's based on the front suspension being the same as the Beaver tail Pro R's.
-
I will leave gearing alone.
-
My Pro R was a Indy, the full tunnel. Not a beaver tail
-
These were originally made for my 2012 Pro R Switchback 800 . I also used them on my 2015 Pro R Indy 600 SP . They aren't a perfict fit, but they are paid for. I've always liked this type of pad. Also have them made for my 2020 Indy XC850. Made by a HCS member
-
And for me scratchers made a reduction of 30 degrees in the same conditions.
-
Seems there are differing opinions on this. I did it to my 15 Indy 600. Scratchers are a much better investment IMO
-
A Team TSS-04 secondary thing. I've done 3 Polaris like this now. I also do it like Doug said. A washer on the clutch sheave side. And I also sand the cup where the bearing rides with 600 wet paper on a glass surface.
-
Just noticed, you didn't use tall nuts. Any reason why?
-
It's on the what can I do list, while I am also waiting on a answer from ROX.
-
I wonder if it was Turbo Jaimie I was having conversations with 4-6 years ago about filled inserts with tungsten.?
-
The best way to describe it is, the mounts where the guard attaches, need to extend to the left or right more, to let the quard cover the bar more and not sit at a silly upward angle.
-
I don't care for the wedge looking guards Polaris sell for the Matryx. I tried mounting the ROX Speed FX that I had on my 15 Indy, but those mounts wont work. Anyone seen anything else?
-
Same for me on push troughs. This will be the first time since early 80's though, I am not using Woodys. Trying Fas Tracs on the 650. As far as Fas Trac backers, I've used them for 20 years or so.
-
Racing - ISOC SX, COR XC, Iron Dog, the GD SOO!!!
racerdave replied to Crnr2Crnr's topic in HCS General Forum
Sno X? Don't follow. Were they a top, winning team? -
nd triple chocolate chip cookies for desert
-
The smoked pot roast came out pretty damn good.Some mesquite and hickory. Kept it around 225-230. Seem to stall around 150 so I let the kettle get up to around 350 ish for 45 minutes or so. Around 160 closed the vents down till around 175. Pulled it off, and tented it for 1/2 hour. Even had a little bark. Chessy hash browns were a great side.
-
Thats Bull shit! Where at Doug?
-
XLT 600 motor with flat slides I believ in a Gen2 chassis/
-
Badge you may have to be group leader around there. No snow in Vilas
-
HCS & And Any Vertical scope websites and their P.M.'s
racerdave replied to Jerry 976's topic in HCS General Forum
I messaged Mr Sled {Tom} on PSP right after the bannings. Told him some guys MIGHT be coming back and he should maybe lift the bans from a few years ago. He said they were all removed a while back. Turbo pm'd me after I had pm'd Mr Sled. And FWIW Brock has been gone for almost 3 years.. I still have mod priveleges there which has been only spam removal really . Very little traffic. -
Bloody Mary
