Tinker

12 hours ago, Puzzleboy said:

Nice try.  We'd like to think we actually educated you somewhat.  I think we all remember UTS making fun of other people's cars, boats etc....... same ol' hypocrite, I see. 

In any case, it's "Freedom" Sledder.  I never had an issue with Zoso either..... I think you're just a little too delicate.  But yeah, we all remember you getting butthurt by pretty much every member. 

Anyway, what would we have to say to make you leave forever?  With Red and Killer/ gone, this place is really looking up! 

 

x2 on what Arctic said..... use the ignore feature if need be.  It's a goddamn internet site; hardly anybody's lifeblood. 

 

 

 

You are not even close to level of Z, I'm amazed no one ever tracked him down.

Make fun of all the shit you want, there's no need for personal attacks or seeking out and posting personal info about someone.

WTF is the point of posting if you appreciate people putting you on ignore ? Mutual Respect is pretty fn simple.

Is it possible to have the quotes of someone you have on ignore not seen in anyone's replies ? The forums would almost moderate themselves if everyone used the ignore and no none read anything from the typical dickheads. 

Cheers

14 hours ago, ckf said:

Do you guys think the Ontario forum needs some form of moderation?

Nah, we're lame 

I don't get why the completely disrespectful pathetic scurges were allowed back here, it's summer I'll give it time but I'm about done with the ignorant inflamotory shock value side of things. Goin back to how OT's daughter's thread was desecrated was the beginning of the end for me. If Rob starts a funnyandinformativeorfuckoffsledder.com site I'm in.

I hope the handful of dirtbags meet the guys and family they pissed all over in person someday and get completely filled in, it was way offside.

Cheers

2 hours ago, revrnd said:

Some are good some are worthless. Used Safety Kleen for years @ work w/ no issues then the company switched to some eco friendly crap that was about as powerful as water (wouldn't lift moly grease from the parts) & you couldn't use it w/o a resoirator because the fumes were so bad. I wish I could remember the name.

Agreed, I should have clarified. The ECO water based shit is...    well shit.

They still sell the petroleum based solvents, the last stuff I got was Virgin and Recycled Solvent, works good. 

57 minutes ago, Sedz said:

ever had any issues with your amps? I had a kicker amp that fried itself and it seem like the new one is already on the same career path. My stereo cuts in and out when the boat isn't running. Works fine when the boat is running though.

Check n double tigthen all your battery leads and the connection to the amp switch if you have. Triple check the ground loop from battery to motor to amp, sounds like the ground side is bad and the vibration from the motor keeps it working when it's running, the amp constantly turning on off will pop it. Use di-electric grease and wrenches where ever possible

Frigin PITA getting this stuff sometimes and prices range alot, I get it from Safety Kleen in Brampton (23 Regan Rd). They want it transported like a combustible fuel but I put in our truck bed without much fuss. Throw a liter of tranny fluid in it and it helps the harsh affects of the solvent and dries clean.

4 hours ago, Puzzleboy said:

Hey, those heffers are an integral part of my ballast/wake system.

Marine stereos have a few differences.  My Clarion CMD has no holes on the top surface of the chassis, the PCB is completely encased/waterproofed in urethane, and the front panel is splash proof without a cover.  The wiring harness has a water shedder above it, to prohibit any water ingress into the connector.  The transom remote is waterproof also, and it sees lots of water.  I use 2 automotive amps with no problems, but the decks will eventually fry and be NFG if it's mounted in the cockpit/helm area.  Just a matter of time & the wrong conditions.

Again the Heffer Factor

32 minutes ago, DAVE said:

Faaaawk

1 hour ago, Stud boy said:

Boats, can you use a normal automotive car radio in them or do you need a radio specially made for a boat? My parents picked up a nice used boat last fall and there is no radio in it. 

No issues at all with an automotive stereo, I've had nothing but with amps n subs no problem. I believe it's a potential radio interference classification for the Coast Guard that creates a marine radio. Try and buy speakers with the most plastic, poly or silicone there is to tolerate the water. Ya never know when a stylin dude like puzzler swings by with a couple 250 lb heffers on the back of a stolen Seadoo for snacks 

5 hours ago, Sedz said:

yeah good call. I guess I assumed that the plugs would be one of the first checks on the list for a marina that couldn't get a boat running after 2 weeks of 'working on it'. 

I don't have a trailer, that picture is of a wake wedge that someone else built that i will be more or less copying. Hopefully all the stuff I ordered on amazon shows up in time so i can build a couple suck gate v 2.0 for myself and some friends.

 Just ribbin Ya

10 hours ago, Axys1 said:

By the way the first rider forward sled was not a Ski-Doo it was a Yamaha!!

 Look at where the motor was mounted. 

Oh look, yellow skiis and a beaver tail... 29 years and counting Polaris, 29 years LoL

1 hour ago, CarlSpackler said:

Every engineer in the last 4000+ years has copied the triangle and the pyramid. The fucking ancient greeks and Egyptians were all over it. Go sue King fucking Tut.....

It's a Cinderella story...

23 hours ago, Sedz said:

Here is a great thread where I found info on how to build your own suckgate. https://www.mastercraft.com/teamtalk/showthread.php?t=70442&page=98

I just used a shower grab bar from home depot because that is all i could find before the weekend. It worked good for a few hours but started popping off at the faster speeds i wanted to ride at. We moved it higher up towards the waterline so it would stick better but it sprayed a bit. It works best on my boat as low on the hull as possible and about a foot from the transom. I'm ordering a heavy duty aluminium cosmos on off of amazon and using the large 90* brackets. I also have some hope plastic that i will get for free. Some people on there have also had good luck using the sea stow suction handles. My next version rebuild will look like the orange one below. 

https://www.amazon.com/COSMOS-Aluminum-suction-lifting-pulling/dp/B007VL3CB0?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

 

Thought you said you didn't have a trailer...

9 hours ago, Axys1 said:

The Rev the biggest POS Sled out it was all hype. The Edge was the last of the sit down Sleds and the best of the all the sit down Sleds. 

You Norton... are mental case

5 hours ago, Axys1 said:

LMFAO It was not Doo that thought of the first stand up sled it was this man he was standing before the Rev was even thought of Ski-Doo just expanded on it.  

Just like Stevie, he's standing up cuz he had to.

Bombi built the sled nobody else would and Cat n Poo took years to copy it. Fuck me Poo still has a beaver tail 15 years later, FIFTEEN YEARS !! LoL 

I haven't read every detail but mold filled interior sounds like the bilge plug was in and that boat filled up, water is now trapped in the hull and it probably froze that way too. Is the trailer bent or was it stored on blocks 

Empty fuel tank: Fuel pick up is gelled up and or fuel filter/water separator is plugged.

Coolant leak in spring ?? Split block or cracked head, head gaskets... it obviously leaked from being froze. Best take compression readings on all cylinders.

Both batteries toast: Either they ran dead on the bilge pumps and they froze or they were under water 

One huge negligence case for sure and add it all up this boat sounds like it was sunk and the fuel floated to the surface

Sink HoleTax to be announced tomorrow

5 hours ago, Poncho said:

A lot were looking for work and opportunity......it was a start for some. We had a few guys at work that got their start in aerospace after having served with the US in Vietnam.

By jumping out of a fn plane ?

Fuhuhuck me, another great ticket sales fiasco.

Anybody have any luck ??

I'm selling my sons 01 CR125, found it last winter all original with about 40 hours on it and since have it track or trail ready with ownership and spare everything. Air filters, levers, throttle tubes, jets...

I'll be asking 3k for it and all the extras. 

50 minutes ago, Slider said:

Those must have been some platinum package deal as top price for a regular ticket was what I paid

That was the Platinum Pre Sale for Amex Cardholders today. Friday sales better go well for our group.

9 minutes ago, Slider said:

I paid $166 per ticket thru a  fan presale .That was regular price, I wouldn't have paid more .

Cheapest I saw was 585 each, that was thru the Hip site link to Ticket Master

27 minutes ago, Slider said:

was able to get 2 centre floor 21st row tickets for the 14th Aug show in Toronto

Congrats, I couldn't justify the price. Highest I saw was $1250 each for Kingston thru Ticket Master. F'n  nuts

On 5/28/2016 at 0:06 AM, Puzzleboy said:

I've always liked him too.  Will be sad to see him gone.

Sounds like some of you guys have a fear of death.  News flash:  nobody gets out alive.

He's alive and will be down for breakfast

Gord is good for another 500 breakfasts, billions of smiles and an eternity of creative genius.

Love the guy

Ignore List updated already