Ez ryder Posted February 15, 2017 Share Posted February 15, 2017 any one know if the main harness under hood. the one u unplug when pulling off hood . the main clip on chassis side . can the plug be replaced with out having to replace whole $4XX buck harness? my clip that locks the 2 together is hanging by a thread . prob wont last the next plug in . thinking zip tie together if it non fixable . looks like it can come apart but no parts in the microfiche Quote Link to comment Share on other sites More sharing options...
Zambroski Posted February 15, 2017 Share Posted February 15, 2017 I really don't see why it couldn't be. I don't have the patience or the fingers for that delicate work but I'm sure it could be done without too much difficulty and some patience. If you don't go fucking blind first. I'd find out how many points in that connector and search the web. Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted February 15, 2017 Author Share Posted February 15, 2017 they are diff than the old M plugs . u could ez yank out the wire and steel clip out of them and reset in diff hole . I did it a hand full of times on the 09 1000s to give them motor reverse . really crazy 2 wire switch helix and drive from a 10 u have motor reverse Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted February 15, 2017 Platinum Contributing Member Share Posted February 15, 2017 I had to take apart the main plug on my nytro, pretty easy to get the wires out with a small screwdriver, there is a release tab for each wire in the plug. Maybe you can find a plug at a sled salvage yard. This one is local to me but I know they ship world wide, Its a huge place with tons and tons of parts, they buy new sleds and strip them.. http://www.hudons.com/ Quote Link to comment Share on other sites More sharing options...
ZRSledhead Posted March 9, 2017 Share Posted March 9, 2017 I used a thin tie strap on my '07 F1000 which worked well. Kept spare TS in the dash bag just in case I needed to remove pod Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted March 16, 2017 Author Share Posted March 16, 2017 I did tie strap worked fine there is a blank space close to mid plug so works well with no wire pinch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.