akvanden Posted April 4, 2022 Share Posted April 4, 2022 (edited) Anyone have any tips on how to keep the MN sticker (not the registration numbers) from coming off? Unless it's on a high gloss area, always seems to start peeling for me. Edited April 4, 2022 by akvanden Quote Link to comment Share on other sites More sharing options...
Deephaven Posted April 4, 2022 Share Posted April 4, 2022 Can't put it on the black plastic crap only the parts that get paint. Quote Link to comment Share on other sites More sharing options...
mnstang Posted April 16, 2022 Share Posted April 16, 2022 Use a heat gun when applying, heat up the area, put sticker on, then use more heat to really get it bonded and push on it. If you still have problems, get some 3m clear bra stuff and cut that out to size, a little bigger than what you're covering and put that over it. I've had to do that on one sled that my numbers are low and kept getting ripped off every ride. That stuff doesn't come off, holds onto the surface really well. I use the 3m primer with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.