Jump to content

HHMMMM......wonder what we will find this time........


taperk600

Recommended Posts

23 hours ago, Crnr2Crnr said:

bullseyes, riot pipe flash, and still in break-in? 

when does the pipe go on?

good #'s Tom

That is with the pipe. 

Bullseyes

Small outlet Riot Pipe (something new they are working on this fall)

Flash (to match the pipe)

 

More to follow next week...... They were playing with various heads today. Stock, modified stock, interchangeable domes, etc..........

  • Like 2
Link to comment
Share on other sites

15 hours ago, taperk600 said:

That is with the pipe. 

Bullseyes

Small outlet Riot Pipe (something new they are working on this fall)

Flash (to match the pipe)

 

More to follow next week...... They were playing with various heads today. Stock, modified stock, interchangeable domes, etc..........

gotcha'

that was a substantial jump

Link to comment
Share on other sites

32 minutes ago, Crnr2Crnr said:

gotcha'

that was a substantial jump

Yes. The pipe made a good jump. And they are working on modifications to the pipe and flash to match with either a stock head or modified head. Will report results once it all gets worked out...........

Link to comment
Share on other sites

21 minutes ago, taperk600 said:

Yes. The pipe made a good jump. And they are working on modifications to the pipe and flash to match with either a stock head or modified head. Will report results once it all gets worked out...........

factory Y-pipe or their own?

Link to comment
Share on other sites

36 minutes ago, Zambroski said:

Truth is, I think you’d be lucky to get a 800/850 sled with much more than 150hp out of the box.

Agree with the manufacturers' break-in programming ........ I agree out-of-the-box power is 140-150 across the board.  With Cat being on the lower end of that scale with the smaller displacement

Edited by taperk600
Link to comment
Share on other sites

57 minutes ago, taperk600 said:

Agree with the manufacturers' break-in programming ........ I agree out-of-the-box power is 140-150 across the board.  With Cat being on the lower end of that scale with the smaller displacement

Yeah, the power/reliability equation in which manufacturers  have to abide.

Link to comment
Share on other sites

The latest was about 3 hp more (and a nice broad band) using the interchangeable dome head with LTS style heads......... but I didn't get a chart to post.

Waiting for some track dyno time now that some clutching parts are due any day now......

  • Like 1
Link to comment
Share on other sites

34 minutes ago, mnstang said:

Pretty sure taper already ditched the epa tune a while ago.  No worries.

Yup, Riot pipe and tune.

He had some comments in the ACTR thread going on. 

Were you fiddling with the pipe on your HC or something else? 

Link to comment
Share on other sites

4 minutes ago, Crnr2Crnr said:

Yup, Riot pipe and tune.

He had some comments in the ACTR thread going on. 

Were you fiddling with the pipe on your HC or something else? 

I haven't done anything with the HC pipe

Link to comment
Share on other sites

4 hours ago, Crnr2Crnr said:

 

He had some comments in the ACTR thread going on. 

 

Pay no mind to those comments........... I know nothing about any of this......... just a dumb-ass over here........

 

Link to comment
Share on other sites

On 11/18/2021 at 4:53 PM, Crnr2Crnr said:

anything new to report @taperk600?

No.

Waiting for time on the track dyno....but they are crazy busy so it's on the back burner right now.

I did do this today however..........getting rid of all the green plastics (and those hideous white skis) .... and ready for the wrap....... Went with the layout on the clutch side. Should look good with the RS windshield.....

2021-11-19 15.44.52.jpg

2021-11-19 15.45.22.jpg

22 Wrap selection.jpg

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

  • 1 month later...
On 12/30/2021 at 9:57 PM, taperk600 said:

No snow to rip on.......but the wrap is done.......

20211230_165900.jpg

20211230_165915.jpg

Dyno time done? 

Wrapper looks great and the seat helps too.  Did you have the windshield wrapped or painted?

 

Edited by Crnr2Crnr
Link to comment
Share on other sites

52 minutes ago, taperk600 said:

It is a Roger Skime windshield..... one of the few non-signed ones that Cat sold as a replacement part....but sold out extremely fast........

I'd be very interested in it if you ever decide to sell it

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Trying to pay the bills, lol

×
×
  • Create New...