taperk600 Posted October 30, 2021 Author Share Posted October 30, 2021 23 hours ago, Crnr2Crnr said: bullseyes, riot pipe flash, and still in break-in? when does the pipe go on? good #'s Tom That is with the pipe. Bullseyes Small outlet Riot Pipe (something new they are working on this fall) Flash (to match the pipe) More to follow next week...... They were playing with various heads today. Stock, modified stock, interchangeable domes, etc.......... 2 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 30, 2021 Share Posted October 30, 2021 15 hours ago, taperk600 said: That is with the pipe. Bullseyes Small outlet Riot Pipe (something new they are working on this fall) Flash (to match the pipe) More to follow next week...... They were playing with various heads today. Stock, modified stock, interchangeable domes, etc.......... gotcha' that was a substantial jump Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 30, 2021 Author Share Posted October 30, 2021 32 minutes ago, Crnr2Crnr said: gotcha' that was a substantial jump Yes. The pipe made a good jump. And they are working on modifications to the pipe and flash to match with either a stock head or modified head. Will report results once it all gets worked out........... Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted October 30, 2021 Share Posted October 30, 2021 21 minutes ago, taperk600 said: Yes. The pipe made a good jump. And they are working on modifications to the pipe and flash to match with either a stock head or modified head. Will report results once it all gets worked out........... factory Y-pipe or their own? Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 30, 2021 Author Share Posted October 30, 2021 6 minutes ago, Crnr2Crnr said: factory Y-pipe or their own? Their Y --- into stock can Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 30, 2021 Share Posted October 30, 2021 Truth is, I think you’d be lucky to get a 800/850 sled with much more than 150hp out of the box. Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 30, 2021 Author Share Posted October 30, 2021 (edited) 36 minutes ago, Zambroski said: Truth is, I think you’d be lucky to get a 800/850 sled with much more than 150hp out of the box. Agree with the manufacturers' break-in programming ........ I agree out-of-the-box power is 140-150 across the board. With Cat being on the lower end of that scale with the smaller displacement Edited October 30, 2021 by taperk600 Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 30, 2021 Share Posted October 30, 2021 57 minutes ago, taperk600 said: Agree with the manufacturers' break-in programming ........ I agree out-of-the-box power is 140-150 across the board. With Cat being on the lower end of that scale with the smaller displacement Yeah, the power/reliability equation in which manufacturers have to abide. Quote Link to comment Share on other sites More sharing options...
taperk600 Posted October 30, 2021 Author Share Posted October 30, 2021 8 minutes ago, Zambroski said: Yeah, the power/reliability equation in which manufacturers have to abide. Not to mention EPA constraints........ Quote Link to comment Share on other sites More sharing options...
Zambroski Posted October 30, 2021 Share Posted October 30, 2021 12 minutes ago, taperk600 said: Not to mention EPA constraints........ Ooof. Yeah…forgot that massive chunk of that equation. 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 5, 2021 Share Posted November 5, 2021 On 10/30/2021 at 5:33 PM, taperk600 said: Not to mention EPA constraints........ any updates? Quote Link to comment Share on other sites More sharing options...
taperk600 Posted November 5, 2021 Author Share Posted November 5, 2021 The latest was about 3 hp more (and a nice broad band) using the interchangeable dome head with LTS style heads......... but I didn't get a chart to post. Waiting for some track dyno time now that some clutching parts are due any day now...... 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 8, 2021 Share Posted November 8, 2021 On 10/30/2021 at 5:33 PM, taperk600 said: Not to mention EPA constraints........ oof... Quote Link to comment Share on other sites More sharing options...
mnstang Posted November 8, 2021 Share Posted November 8, 2021 Pretty sure taper already ditched the epa tune a while ago. No worries. 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 8, 2021 Share Posted November 8, 2021 34 minutes ago, mnstang said: Pretty sure taper already ditched the epa tune a while ago. No worries. Yup, Riot pipe and tune. He had some comments in the ACTR thread going on. Were you fiddling with the pipe on your HC or something else? Quote Link to comment Share on other sites More sharing options...
mnstang Posted November 8, 2021 Share Posted November 8, 2021 4 minutes ago, Crnr2Crnr said: Yup, Riot pipe and tune. He had some comments in the ACTR thread going on. Were you fiddling with the pipe on your HC or something else? I haven't done anything with the HC pipe Quote Link to comment Share on other sites More sharing options...
taperk600 Posted November 9, 2021 Author Share Posted November 9, 2021 4 hours ago, Crnr2Crnr said: He had some comments in the ACTR thread going on. Pay no mind to those comments........... I know nothing about any of this......... just a dumb-ass over here........ Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 13, 2021 Share Posted November 13, 2021 On 10/26/2021 at 7:36 AM, mnstang said: Excited to hear more feedback about the new clutch as the season goes. Sleeper change for 22? 1 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted November 18, 2021 Share Posted November 18, 2021 anything new to report @taperk600? Quote Link to comment Share on other sites More sharing options...
taperk600 Posted November 20, 2021 Author Share Posted November 20, 2021 On 11/18/2021 at 4:53 PM, Crnr2Crnr said: anything new to report @taperk600? No. Waiting for time on the track dyno....but they are crazy busy so it's on the back burner right now. I did do this today however..........getting rid of all the green plastics (and those hideous white skis) .... and ready for the wrap....... Went with the layout on the clutch side. Should look good with the RS windshield..... 4 1 Quote Link to comment Share on other sites More sharing options...
taperk600 Posted December 31, 2021 Author Share Posted December 31, 2021 No snow to rip on.......but the wrap is done....... 6 Quote Link to comment Share on other sites More sharing options...
Crnr2Crnr Posted January 1, 2022 Share Posted January 1, 2022 (edited) On 12/30/2021 at 9:57 PM, taperk600 said: No snow to rip on.......but the wrap is done....... Dyno time done? Wrapper looks great and the seat helps too. Did you have the windshield wrapped or painted? Edited January 1, 2022 by Crnr2Crnr Quote Link to comment Share on other sites More sharing options...
mnstang Posted January 1, 2022 Share Posted January 1, 2022 Curious about the windshield as well. Looks a lot like the Roger Skime windshield. Quote Link to comment Share on other sites More sharing options...
taperk600 Posted January 1, 2022 Author Share Posted January 1, 2022 It is a Roger Skime windshield..... one of the few non-signed ones that Cat sold as a replacement part....but sold out extremely fast........ Quote Link to comment Share on other sites More sharing options...
mnstang Posted January 1, 2022 Share Posted January 1, 2022 52 minutes ago, taperk600 said: It is a Roger Skime windshield..... one of the few non-signed ones that Cat sold as a replacement part....but sold out extremely fast........ I'd be very interested in it if you ever decide to sell it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.