awful knawful Posted March 4, 2021 Share Posted March 4, 2021 35 minutes ago, ACE said: Doubtful. Cat has several years head start and Mach is one year only This year moran! Quote Link to comment Share on other sites More sharing options...
awful knawful Posted March 4, 2021 Share Posted March 4, 2021 35 minutes ago, ACE said: And shocks that are fit for a radio flyer Elka. Fox. Exit Quote Link to comment Share on other sites More sharing options...
Doo900t Posted March 4, 2021 Share Posted March 4, 2021 2 hours ago, awful knawful said: Buy an adrenaline and have fun for way less $! You dumb I ordered a X pkg with the Mach engine for about 4500 dollars less than a Mach. I don't need smart shocks or a goofy gauge and have no idea what the fuck I would do with launch control. The Polaris boys are spooging all over themselves about their gauge. Someone needs to tell them it's still a Polaris. Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 1 hour ago, Doo900t said: I ordered a X pkg with the Mach engine for about 4500 dollars less than a Mach. I don't need smart shocks or a goofy gauge and have no idea what the fuck I would do with launch control. The Polaris boys are spooging all over themselves about their gauge. Someone needs to tell them it's still a Polaris. Launch control is sweet Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 All the srxs and tcats will want to go “from a roll” Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 1 minute ago, Winterman said: All the srxs and tcats will want to go “from a roll” And the Machs will want to run 660’ Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 8 minutes ago, f7ben said: And the Machs will want to run 660’ 1000 no problem Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 Just now, Winterman said: 1000 no problem I don’t think it will hold the winder off for 1000’ Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 I think it will top end a winder Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 Just now, Winterman said: I think it will top end a winder Not a chance Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 Stock vs stock Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 (edited) 1 minute ago, Winterman said: Stock vs stock The winder will run 120 stock in a far enough distance. No 900T isnt running that speed with 200hp unless it’s slammed and race prepped Edited March 5, 2021 by f7ben Quote Link to comment Share on other sites More sharing options...
jdsky Posted March 5, 2021 Share Posted March 5, 2021 Doo would have had a winder to benchmark it against. But as in any dick measuring contest on the lake there are way to many variables the least of which is being able to find a stock winder sitting out on a lake...... Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 Just now, jdsky said: Doo would have had a winder to benchmark it against. But as in any dick measuring contest on the lake there are way to many variables the least of which is being able to find a stock winder sitting out on a lake...... Snake owns the only stock fucking winder East of the Mississippi lol Quote Link to comment Share on other sites More sharing options...
Anler Posted March 5, 2021 Share Posted March 5, 2021 10 minutes ago, f7ben said: I don’t think it will hold the winder off for 1000’ It's going to eat winders. Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 8 minutes ago, f7ben said: The winder will run 120 stock in a far enough distance. No 900T isnt running that speed with 200hp unless it’s slammed and race prepped A 170 go 05 mach z would run that too. with 170ish hp Quote Link to comment Share on other sites More sharing options...
jdsky Posted March 5, 2021 Share Posted March 5, 2021 If nothing else at least the 4 stroke shootout should be minimally interesting this time around. That is if they can wrangle one for the event. Quote Link to comment Share on other sites More sharing options...
f7ben Posted March 5, 2021 Share Posted March 5, 2021 Just now, Winterman said: A 170 go 05 mach z would run that too. with 170ish hp Absolutely....my cfr1000 would as well My very good running 850 gade hit a wall at 109ish and every 900t I see with speeds on snow listed isnt close to 120 Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 05 Mach Z Don’t know what happened above Quote Link to comment Share on other sites More sharing options...
Winterman Posted March 5, 2021 Share Posted March 5, 2021 The old and new mach feature lowered suspension. I know you already are aware of this. It will make all the difference. 1996 XCR 440s were radared at 106 in at the I500. I was there. What could the hp possibly be? 80?, 90? Quote Link to comment Share on other sites More sharing options...
rump-rider Posted March 5, 2021 Share Posted March 5, 2021 I can’t wait to see the shootout results. I think the Mach is going to surprise the poor yamacat guys. Don’t forget the winder was rated at 180 when it came out. If the 900R is underrated too, it has the advantage of launch control and being like 50 lbs lighter. The Mach is also a way better trail sled... Quote Link to comment Share on other sites More sharing options...
Angry ginger Posted March 5, 2021 Share Posted March 5, 2021 4 hours ago, Doo900t said: I ordered a X pkg with the Mach engine for about 4500 dollars less than a Mach. I don't need smart shocks or a goofy gauge and have no idea what the fuck I would do with launch control. The Polaris boys are spooging all over themselves about their gauge. Someone needs to tell them it's still a Polaris. if you like to ride off the beaten path with a GPS the poo gauge is the real deal. Quote Link to comment Share on other sites More sharing options...
DriftBusta Posted March 5, 2021 Share Posted March 5, 2021 (edited) 10 hours ago, Wildboer said: You're delusional. That was one of the dumbest chassis in snowmobile history dude, it belongs on the lake because it weighs as much as a boat I’ve ridden a couple of them. Kind of feels like a Buick Lesabe on the trails.. sporty but not. 😆 7 hours ago, awful knawful said: They'll sell more machs vs tcats. Ouchie Not much question there. 20 grand though? They can fucking keep it. I am not ready to spend that much for a snowmobile yet. 2 hours ago, f7ben said: I don’t think it will hold the winder off for 1000’ Yeah I don’t either. 2 hours ago, f7ben said: The winder will run 120 stock in a far enough distance. No 900T isnt running that speed with 200hp unless it’s slammed and race prepped Normally I would agree with you but I’ve seen silverbacks GPS results 2 hours ago, f7ben said: Absolutely....my cfr1000 would as well My very good running 850 gade hit a wall at 109ish and every 900t I see with speeds on snow listed isnt close to 120 My stock turbo was good for about 105 with the 1.25. After I put the 16x137x1.75 and regeared, just ubder 100. Silverbacks “stock” motored turbo witha 14”x1”x137” does 119. He said he has zero interest in buying a Mach 1, I don’t either. I will wait, and I am assuming SkiDoo will give me my turbo 146 with the good suspension bits. That sled will fit 95% of my riding needs. Edited March 5, 2021 by DriftBusta Quote Link to comment Share on other sites More sharing options...
Anler Posted March 5, 2021 Share Posted March 5, 2021 7 hours ago, rump-rider said: I can’t wait to see the shootout results. I think the Mach is going to surprise the poor yamacat guys. Don’t forget the winder was rated at 180 when it came out. If the 900R is underrated too, it has the advantage of launch control and being like 50 lbs lighter. The Mach is also a way better trail sled... The 150hp doo turbo was half a second behind the tcats at the last shoot out. And was right there with 160-170hp 850's. I think a 180ish hp puts the mach right there or better against the winder. Especially with launch control. Quote Link to comment Share on other sites More sharing options...
Doo900t Posted March 5, 2021 Share Posted March 5, 2021 7 hours ago, Angry ginger said: if you like to ride off the beaten path with a GPS the poo gauge is the real deal. I have a 7 inch Garmin mounted on my glove box extension and it works great. I have Uclear communicators and I don't care where my riding buddies are and don't want to answer my phone when I'm riding. All I want my gauge for are the usual things like mph, rpm, time of day, engine temp and trip meter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.