jdsky Posted January 4, 2021 Share Posted January 4, 2021 What is the top end on that sled? 14 minutes ago, Vtsnogirl said: This is my 2021 Backcountry Sport 600 EFI. Finally got to stretch its legs yesterday! I like the new motor a lot. I've had a few 600 e-tecs in smaller track lengths (120/129). This my first long track & Gen 4. Also have an older 900 Ace to ride so I'm use to no top end lol! My only complaint so far is the dumb key. I keep trying to start it from the handlebar. What is the top end on that sled? Post up your experiences with it this season. 1 Quote Link to comment Share on other sites More sharing options...
Gold Member 800renegaderider Posted January 4, 2021 Gold Member Share Posted January 4, 2021 30 minutes ago, Vtsnogirl said: This is my 2021 Backcountry Sport 600 EFI. Finally got to stretch its legs yesterday! I like the new motor a lot. I've had a few 600 e-tecs in smaller track lengths (120/129). This my first long track & Gen 4. Also have an older 900 Ace to ride so I'm use to no top end lol! My only complaint so far is the dumb key. I keep trying to start it from the handlebar. I’m interested in your assessment of the sled also I’m really considering spring checking one like yours. I want something new sick of dealing with used junk. The price of this is what has me seriously thinking of getting one. 1 Quote Link to comment Share on other sites More sharing options...
Vtsnogirl Posted January 4, 2021 Share Posted January 4, 2021 46 minutes ago, jdsky said: What is the top end on that sled? What is the top end on that sled? Post up your experiences with it this season. I'm still in break-in right now, though I ride the sled easy for a bit to get belt set then go like I usually ride. Where I was had hard packed logging road straight aways so I pinned it a couple of times. Didn't realize my gauge was in km's! Haha though through my conversion saw 78 on dream-o-meter at 7100 Rpms. The writing is so small so this is glancing at it. Its pretty snappy. Throttle response feels great imo. It's louder than my etec & more vibration at idle though didn't feel anything in the bars. I think the mxz 129 version of this will be a hoot in the twisties! Will get more miles since right on trail here in Island Pond VT. 30 minutes ago, 800renegaderider said: I’m interested in your assessment of the sled also I’m really considering spring checking one like yours. I want something new sick of dealing with used junk. The price of this is what has me seriously thinking of getting one. I spring ordered mine and price was a big factor for me. My friend took his with the 1 yr warranty at 7349 plus tax & fees (VT). I took 4 yr warranty at 8500 no tax (NH). The MXZ and Renegade obviously cheaper. 2 Quote Link to comment Share on other sites More sharing options...
Gold Member 800renegaderider Posted January 4, 2021 Gold Member Share Posted January 4, 2021 16 minutes ago, Vtsnogirl said: I'm still in break-in right now, though I ride the sled easy for a bit to get belt set then go like I usually ride. Where I was had hard packed logging road straight aways so I pinned it a couple of times. Didn't realize my gauge was in km's! Haha though through my conversion saw 78 on dream-o-meter at 7100 Rpms. The writing is so small so this is glancing at it. Its pretty snappy. Throttle response feels great imo. It's louder than my etec & more vibration at idle though didn't feel anything in the bars. I think the mxz 129 version of this will be a hoot in the twisties! Will get more miles since right on trail here in Island Pond VT. I spring ordered mine and price was a big factor for me. My friend took his with the 1 yr warranty at 7349 plus tax & fees (VT). I took 4 yr warranty at 8500 no tax (NH). The MXZ and Renegade obviously cheaper. That is the biggest factor for me is price I got 2 small kids so I rarely get to go north anymore or ride in general. I don’t want 13-15k tied up in the sled I really want to only use a handful of times a year. 78 is plenty fast for southern nh might fall behind on northern trips with my buds on turbos but whatever it’s new hopefully no hassle just turn key and ride. Ride this until my kids can ride on trails, buy myself my dream sled and hand this down to the wife. 7,349 is a hell of a deal for a new fuel injected sled. What dealer did you both get yours at?Thanks for the info and I look forward to hearing how it runs out of break in and if you run into any issues this season. 1 1 Quote Link to comment Share on other sites More sharing options...
Vtsnogirl Posted January 4, 2021 Share Posted January 4, 2021 35 minutes ago, 800renegaderider said: That is the biggest factor for me is price I got 2 small kids so I rarely get to go north anymore or ride in general. I don’t want 13-15k tied up in the sled I really want to only use a handful of times a year. 78 is plenty fast for southern nh might fall behind on northern trips with my buds on turbos but whatever it’s new hopefully no hassle just turn key and ride. Ride this until my kids can ride on trails, buy myself my dream sled and hand this down to the wife. 7,349 is a hell of a deal for a new fuel injected sled. What dealer did you both get yours at?Thanks for the info and I look forward to hearing how it runs out of break in and if you run into any issues this season. I bought mine at Lemieux's NH and my friend at Land Air. Yes he had the $500 golden ticket email and 750 off for warranty no extra warranty. Without the two it would have been close to my price. My dealer said I could save $250 for each year but didn't want to if I didn't like it or problems. Extra warranty is nice. I believe Land Air quoted him $8400 something before this. MSRP was $8999 on the Backcountry. I'll keep you posted a start a 600 EFI ride post not to gum up this topic for the original poster. 1 1 Quote Link to comment Share on other sites More sharing options...
smokin george Posted January 4, 2021 Share Posted January 4, 2021 On 12/17/2020 at 4:17 PM, oldslowsledder said: That 600 carbed was a great motor, had several over the years, put a ton of miles on trouble free. My only beef was the hanging idle in the later years but a blip of the throttle cured. We'll see how the 85hp 600EFI that replaced it makes out. They certainly have it priced right up here north of the border I had 2-2011 Sport 600"s and 2-2016 Renegade 600"s. I had the hanging idle on one of each and other than that no issues whatsoever. 1 Quote Link to comment Share on other sites More sharing options...
oldslowsledder Posted January 4, 2021 Author Share Posted January 4, 2021 26 minutes ago, Vtsnogirl said: I bought mine at Lemieux's NH and my friend at Land Air. Yes he had the $500 golden ticket email and 750 off for warranty no extra warranty. Without the two it would have been close to my price. My dealer said I could save $250 for each year but didn't want to if I didn't like it or problems. Extra warranty is nice. I believe Land Air quoted him $8400 something before this. MSRP was $8999 on the Backcountry. I'll keep you posted a start a 600 EFI ride post not to gum up this topic for the original poster. No worries, glad to have some activity in here! I'm also quite interested in this sled so will be looking forward to your reviews! 1 Quote Link to comment Share on other sites More sharing options...
Dave Posted January 5, 2021 Share Posted January 5, 2021 2015 summit 2 Quote Link to comment Share on other sites More sharing options...
oldslowsledder Posted January 7, 2021 Author Share Posted January 7, 2021 My new to me yard sled, needed something fan cooled so I can leave it running while I putter around trailering wood, brush etc.. Plus with the extra seating position wife and I can take grandson for a spin! 4 Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted January 8, 2021 Share Posted January 8, 2021 On 12/17/2020 at 3:17 PM, oldslowsledder said: That 600 carbed was a great motor, had several over the years, put a ton of miles on trouble free. My only beef was the hanging idle in the later years but a blip of the throttle cured. We'll see how the 85hp 600EFI that replaced it makes out. They certainly have it priced right up here north of the border Bigger pilot and a bit of fiddling with the air screw gets it some what under control . It just sucks you need to do so much fuking work just to do a 10 buck job and hope you get it right the first time lol . Also found out this yr they moved the jug studs just slightly on a few different yrs of that sport mid build 15 was one if them . Took 3 different tries to get the correct base gasket just a cunt hair off on stud placement. Why ? Zero fucking idea Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted January 8, 2021 Share Posted January 8, 2021 2 Quote Link to comment Share on other sites More sharing options...
awful knawful Posted January 10, 2021 Share Posted January 10, 2021 2019 Expedition Sport 3 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Highmark Posted January 13, 2021 Platinum Contributing Member Share Posted January 13, 2021 1100 Mach with a 100 shot. 3 Quote Link to comment Share on other sites More sharing options...
Fireball 440 Posted January 28, 2021 Share Posted January 28, 2021 2011 GSX 1200 & 2007 MXZ 600 SDI 2 Quote Link to comment Share on other sites More sharing options...
jethro Posted February 1, 2021 Share Posted February 1, 2021 Here is my '19 900 Enduro Turbo. Hurricane 195 with Dalton weights. 3 Quote Link to comment Share on other sites More sharing options...
Wildboer Posted February 1, 2021 Share Posted February 1, 2021 2019 XRS 600r, USI X2 skis. 2 Quote Link to comment Share on other sites More sharing options...
Ez ryder Posted February 16, 2021 Share Posted February 16, 2021 2 Quote Link to comment Share on other sites More sharing options...
Doo900t Posted February 27, 2021 Share Posted February 27, 2021 Took these today just before it was loaded and off to it’s new owner. 2 Quote Link to comment Share on other sites More sharing options...
oldslowsledder Posted February 27, 2021 Author Share Posted February 27, 2021 Replacing it with a Mach Z? Quote Link to comment Share on other sites More sharing options...
oldslowsledder Posted February 28, 2021 Author Share Posted February 28, 2021 Spent kids inheritance today... 6 Quote Link to comment Share on other sites More sharing options...
Doo900t Posted March 1, 2021 Share Posted March 1, 2021 On 2/27/2021 at 9:48 AM, oldslowsledder said: Replacing it with a Mach Z? No but I did order a Renegade X in black with the Mach Z engine. I didn’t want to spend that much money on a snowmobile. Besides I have a C8 Corvette on order and that’s where I would prefer to spend it. 3 Quote Link to comment Share on other sites More sharing options...
Doo900t Posted March 1, 2021 Share Posted March 1, 2021 On 2/27/2021 at 8:06 PM, oldslowsledder said: Spent kids inheritance today... My kids know I won’t be leaving them any money. I’ve told them that many times already. Quote Link to comment Share on other sites More sharing options...
jdsky Posted March 1, 2021 Share Posted March 1, 2021 On 2/27/2021 at 7:06 PM, oldslowsledder said: Spent kids inheritance today... Congrats on the new sled! 1 Quote Link to comment Share on other sites More sharing options...
LE_07F8 Posted March 4, 2021 Share Posted March 4, 2021 I'm late to the party but my '16 mxz x 600 and the husband's '20 Renegade Adrenaline 850 with major shock upgrade. Going to rock the '16 one more season and then agonize over snowchecking a mxz or renegade. 2 Quote Link to comment Share on other sites More sharing options...
oldslowsledder Posted July 19, 2021 Author Share Posted July 19, 2021 Man us Ski Doo riders are a quiet bunch No, that's not me lol 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.