racinfarmer Posted June 2, 2022 Author Share Posted June 2, 2022 Ok FSCE Braintrust. This shitty thing has taught me a few new swearword combos I thought not possible. Now the POS will run and mower great, like a fucking bat out of hell, for around 20 minutes, then it sputters about until you disengage the mower. Clears itself out and runs like a damn champ! Re-engage the mower and it sputters and carries on and whatnot. I'm listing it up for sale tomorrow either way. Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted June 2, 2022 Platinum Contributing Member Share Posted June 2, 2022 9 minutes ago, racinfarmer said: Ok FSCE Braintrust. This shitty thing has taught me a few new swearword combos I thought not possible. Now the POS will run and mower great, like a fucking bat out of hell, for around 20 minutes, then it sputters about until you disengage the mower. Clears itself out and runs like a damn champ! Re-engage the mower and it sputters and carries on and whatnot. I'm listing it up for sale tomorrow either way. What? Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted June 2, 2022 Author Share Posted June 2, 2022 27 minutes ago, Rigid1 said: What? My Forest Gump mower. It has been a real pile. Runs and mows great for 15-20 minutes, then acts up and will only run and drive, but not mow. Or sit with the mower on, but as soon as you start to drive, it sputters and carries on until you turn the mower off, then it clears itself out and runs great again. Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted June 2, 2022 Platinum Contributing Member Share Posted June 2, 2022 7 hours ago, racinfarmer said: My Forest Gump mower. It has been a real pile. Runs and mows great for 15-20 minutes, then acts up and will only run and drive, but not mow. Or sit with the mower on, but as soon as you start to drive, it sputters and carries on until you turn the mower off, then it clears itself out and runs great again. I would guess fuel or it's sucking air..seems to struggle under load when the blades are engaged?? could just be the governor spring is shot or linkage is binding. Even a little tweak in all that control linkage can really fuck up a mower Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted June 3, 2022 Author Share Posted June 3, 2022 13 hours ago, Rigid1 said: I would guess fuel or it's sucking air..seems to struggle under load when the blades are engaged?? could just be the governor spring is shot or linkage is binding. Even a little tweak in all that control linkage can really fuck up a mower I just find it odd that for 15-20 minutes, it runs, drives, and mows like a absolute unit, then just falls flat on it's face when the blade is engaged. Disengage the blade and once it clears itself out, it runs great. Re-engage the blade and back to falling flat on it's face. Either way, I'd done with it and it is priced to sell. Already had the usual smattering of lowball offers. One might actually be serious. Quote Link to comment Share on other sites More sharing options...
Deephaven Posted June 3, 2022 Share Posted June 3, 2022 Is it female? Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted June 5, 2022 Author Share Posted June 5, 2022 Sold the mower yesterday. Guy said he knew exactly what was wrong with it. 2 hours later he is messaging me that it won't start. Reinvented my recouped investment money in a pair of Ryobi clamp fans. So worth the $25 each if you are already on the Ryobi battery setup. They'll make sitting in staging a lot more comfortable. 1 Quote Link to comment Share on other sites More sharing options...
Angry ginger Posted June 8, 2022 Share Posted June 8, 2022 On 6/5/2022 at 4:53 PM, racinfarmer said: Sold the mower yesterday. Guy said he knew exactly what was wrong with it. 2 hours later he is messaging me that it won't start. Reinvented my recouped investment money in a pair of Ryobi clamp fans. So worth the $25 each if you are already on the Ryobi battery setup. They'll make sitting in staging a lot more comfortable. i should pick myself one for the Sxs to move air Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted June 8, 2022 Author Share Posted June 8, 2022 7 hours ago, Angry ginger said: i should pick myself one for the Sxs to move air The Homeless Despot has them right now. At the store we go to, they are on the front wall with a bunch of other Ryobi stuff. Quote Link to comment Share on other sites More sharing options...
Gold Member 800renegaderider Posted July 16, 2022 Gold Member Share Posted July 16, 2022 FedEx just dropped off some goodies 👍 ram clutch, frpp billet flywheel and new hardware 1 Quote Link to comment Share on other sites More sharing options...
Gold Member poopooforme Posted July 16, 2022 Gold Member Share Posted July 16, 2022 On 4/22/2022 at 12:44 PM, HSR said: I like the line " just proof that an engineer will crawl over a mountain of prostitutes' just to fuck a mechanic!" 1 Quote Link to comment Share on other sites More sharing options...
Gold Member 800renegaderider Posted July 21, 2022 Gold Member Share Posted July 21, 2022 On 7/16/2022 at 11:12 AM, 800renegaderider said: FedEx just dropped off some goodies 👍 ram clutch, frpp billet flywheel and new hardware Stayed late got most of the transmission stuff back together. It was to damn hot to finish it up tonight though. Couple more things on the list to wrap up and hopefully this turd is ready to be running again after 5 long years. 1 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted July 30, 2022 Platinum Contributing Member Share Posted July 30, 2022 Got these today, been wanting a nice set of bolt extractors. 2 Quote Link to comment Share on other sites More sharing options...
Gold Member 800renegaderider Posted July 31, 2022 Gold Member Share Posted July 31, 2022 2 hours ago, Rigid1 said: Got these today, been wanting a nice set of bolt extractors. Those are a must have for salty northern areas 👍 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted July 31, 2022 Platinum Contributing Member Share Posted July 31, 2022 48 minutes ago, 800renegaderider said: Those are a must have for salty northern areas 👍 I have recently found that out on the 02 4Runner..lol..Bolt heads. Just crumble.. 1 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted October 17, 2022 Author Share Posted October 17, 2022 The shit show continues. 1 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted November 2, 2022 Author Share Posted November 2, 2022 Gray toolboxes from the usual scumbags - coming soon. 1 Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted February 21, 2023 Author Share Posted February 21, 2023 Welp, back to fighting the small engines. Snowblower quit life a month or so ago, but between the tractor and a shovel, haven't needed it. Decided to work on it. Can't get it to start to save my life. Guess that $18 shipped carb from the jungle website is probably fucking junk. 1 Quote Link to comment Share on other sites More sharing options...
Platinum Contributing Member Rigid1 Posted February 21, 2023 Platinum Contributing Member Share Posted February 21, 2023 5 hours ago, racinfarmer said: Welp, back to fighting the small engines. Snowblower quit life a month or so ago, but between the tractor and a shovel, haven't needed it. Decided to work on it. Can't get it to start to save my life. Guess that $18 shipped carb from the jungle website is probably fucking junk. I would tell people to buy 5, you might get one that would work or have enough pieces to build a complete carb.. Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted February 25, 2023 Author Share Posted February 25, 2023 On 2/21/2023 at 5:02 AM, Rigid1 said: I would tell people to buy 5, you might get one that would work or have enough pieces to build a complete carb.. After a few good sessions in the heated ultrasonic cleaner and some troubleshooting, she fired up and chooched along. Not well, but chooched nonetheless. Now, how many here want to tell me how great the Horrible Fraught furniture rollers make excellent sled rollers? 1 Quote Link to comment Share on other sites More sharing options...
NaturallyAspirated Posted February 25, 2023 Share Posted February 25, 2023 1 hour ago, racinfarmer said: After a few good sessions in the heated ultrasonic cleaner and some troubleshooting, she fired up and chooched along. Not well, but chooched nonetheless. Now, how many here want to tell me how great the Horrible Fraught furniture rollers make excellent sled rollers? You are AvE overloading it! Neal Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted February 26, 2023 Author Share Posted February 26, 2023 22 hours ago, NaturallyAspirated said: You are AvE overloading it! Neal I've been spending way too much time in the shop lately. Even taking meetings on WFH days in the shop. Quote Link to comment Share on other sites More sharing options...
NaturallyAspirated Posted February 26, 2023 Share Posted February 26, 2023 1 hour ago, racinfarmer said: I've been spending way too much time in the shop lately. Even taking meetings on WFH days in the shop. That’s not possible! Neal Quote Link to comment Share on other sites More sharing options...
racinfarmer Posted February 27, 2023 Author Share Posted February 27, 2023 22 hours ago, NaturallyAspirated said: That’s not possible! Neal No, it is. Way too much stuff going on, it is starting to feel like another full time job. Quote Link to comment Share on other sites More sharing options...
Cwhite138 Posted February 28, 2023 Share Posted February 28, 2023 @Rigid1 I seen you work on some fancy shit. What do you use to get diagrams for more exotic vehicles. Im trying to find accelerator pedal pinouts and test values for a 23 emira. We already have aldata and prodemand but they do not have access. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.