Jump to content

fast m10


Recommended Posts

  • 6 years later...

Great riding suspension on a sit down sled.

Tough to set up to it's full potential.

Would talk to Fast about lengthening or replacing rails along with other changes recommend.

No idea about rider forward sleds.

Link to comment
Share on other sites

I think they had some potential benefits but I think many sledders just ride a machine and take for granted a balance of a machine and have no idea what it takes or what is involved in getting that right.  You can't just expect to bolt in an aftermarket skid and do no tuning to it to get it right.  You're redesigning the entire sled and if you think you're going to nail it on the first try by bolting it in, don't do it.  If you're ready to do a ton of test and tuning and like doing that, you could possibly end up with an improvement over what you currently have.

Link to comment
Share on other sites

An M10 is a good cruising suspension for a non-rider forward sled like your 06.  There's a lot of adjustment on them so they are a little tedious to setup but offer a good ride once setup properly.  The problem you'll likely find is the correct rails for ma 136" track.  Wife's 2006 IQ LX was an odd 128" track with M10.  

You may have quite a bit of cost purchasing the suspension and getting the right rails when your done.  You should also have the shocks rebuilt as long as you your going through the work.  You may be better to just have your current shocks rebuilt and running the current suspension.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Trying to pay the bills, lol

×
×
  • Create New...