Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 11/17/2017 in Posts

  1. @f7ben is the sites biggest faggot. Not that everyone didn't already know that
    6 points
  2. 4 points
  3. Steak and cheese calzone. Already tuned, cigar, 16 year old scotch, and out of the tub. Hot shower, hit the recliner button. Maybe some cherry pie later.
    3 points
  4. No they aren't really all that difficult or complex. Within 90 days of welding on a pipeline the Pipeline welders must qualify to the exact same procedure that will be used during construction. His qualification welds will be inspected and tested by a certified welding inspector. During construction a cwi is on location for every weld. The cwi signs off on every step of the procedure. The cwi or QUality Assurance tech will approve fit up, gap, high/low and magnativity for every welded joint. The QA will inspect and approve the root pass after its completed. He will then inspect and approve the filler passes when they are complete. The QA will then inspect and approve the cap passes when they are complete. After the weld is complete it is then subject to non destructive evaluation testing like Xray or ultrasonic testing. Federal code only requires 10% of the welds to be NDE tested as long as a QA/CWI was on location and signed off on every weld. If the QA/CWI Does not approve every weld then every weld must be NDE tested. For a 24" diameter pipeline each weld location takes about 30- 36 man hours to complete. The thicker the pipe wall the longer it takes to complete the weld. Typically 2 welders will work every joint. They will be opposite of each other welding away. In a 12 hour shift they get about 8hrs of actually burning rod. A lot of pipeline builders use a procedure that allows automated wire feed welders for the fill and cap passes. The welder is in control of and watches the AutoMIG tool 100% of the time. AutoMIG welders do a great job and make beautiful welds. Pipeline failures at welded connections are ofter caused by improperly applied heat and cooling procedures. The weld cracks in the heat affected zone just a few mm from the edge of the weld. The weld usually cracks before the pipeline cools back down to ambient tempature. An xray during construction would detect this crack every time. A QA/CWI can not see the crack with their naked eye. For this reason some pipeline builders perform 100% xray on every weld even though federal code is only 10%. How bout that long answer.
    3 points
  5. Good god the hair and I guess my IH Scout was a little rougher around the edges than I remember!
    3 points
  6. It'll be like the obunga presidency never existed! #winning
    2 points
  7. When did you graduate from Slinger's Sleuth School?
    2 points
  8. Raise the CG, that should'nt fuck with the engineered roll center to much I could see a doo owner enjoying getting ass fucked by a seat
    2 points
  9. I went to see Kid Rock at The Saginaw Civic Center probably 10 years ago with my brother and two of his friends. Just got hammered drunk and I swear Kirk Gibson was there but was trying to be low key and I keep yelling his name....Gibby, Gibby....he kept shaking his head no but it was him..I know it. Pretty sure at one point I fell backwards over a bunch of chairs and couldn't remember most the show the next day.
    2 points
  10. Not meant to played quietly!
    2 points
  11. You don't even watch it and the only reason you showed up with Melonhead is to act like a dumbass....mission accomplished.
    2 points
  12. Speaking of the Metro @bussman.
    2 points
  13. Yep. The guy took a picture that my wife had of me at work on a helicopter job and made it. It’s not burnt but cut out
    2 points
  14. And a plastic bag over his head to keep the water out...
    2 points
  15. I love Ginger Baker and Taylor Hawkins is a full on beast Here is one of my favorites playing today
    2 points
  16. Damn, Jorgensen was such a figure in that Chicago industrial sound, saw them and that scene a lot, especially at the Metro. Ministry actually started as a new wave band but he hated it and went his own route. My favorite of theirs.
    2 points
  17. Ran out of god damn ribbon for the tree. Didn’t want to go to the craft store tomorrow but appears to be on tomorrow agenda
    1 point
  18. https://pagesix.com/2017/11/16/multiple-women-accuse-ron-jeremy-of-sexual-assault/?_ga=2.44908130.759757212.1510775714-1125631634.1510775714
    1 point
  19. We all clean each other up with checkered flags when we’re done with the supply being so UUUUUGGGE! Hey @Sal Rosenbergget my taint area better this time.
    1 point
  20. Do you paddle your canoe to daddy’s shop every morning? Wear your lap belt.
    1 point
  21. Good thing he was on a superior handling sled, just imagine the damage if it was on a Cat or Doo?
    1 point
  22. Lol dinosaurs are fake... This dude is a straight bible thumper. Tried to play it off, but holy shit HAHAHAHA.
    1 point
  23. have a few Coors light Bipolarhooknose
    1 point
  24. You only get sexually molested by another man riding a Doo six times before you realize you should just keep riding by that rest area. Those saddlebags are full of KY and taint smell.
    1 point
  25. It was always funny when I rode my Doo into a bunch of other Doo riders....until Irealized they were all faggots.
    1 point
  26. Useless on a trail sled . Some redheaded 13 year old punk on a clapped out zl 500 will drive right past you in the whoops ....... even with your Superstar costume on
    1 point
  27. "OIL SHORTAGE DUE TO MASSIVE PIPELINE LEAK , FUEL PRICES TO SPIKE " !!!!!!!!!!!!!!!!!!!!!!!4444444444
    1 point
  28. I think you are both Queerer than $3 bills. the G4 is the best handling, best looking and the best performing snowmobile of all time.
    1 point
  29. 1 point
  30. See, you just don’t get how to frame your response. I understand that’s past your education level, but let me help you. You keep having the guns are dangerous discussion. That isn’t relevant. To a low information voter, it may be, but I am going to challenge you to use some of you common sense here. You have two options here. Freedom to make choices and absolute safety. Freedom to own a weapon can be upheld with proper gun control, but mostly it requires proper enforcement. Regulation that doesn’t infringe on right to freedom. Absolute safety is saying your right to freedom is less than a preconceived notion of safety. Unfortunately I am about to fuck that whole arguement with two fists... Our two countries percentage of the population are within 7 hundredths of a percent in terms of people who die every year as a percentage of the population. This includes all types of deaths. What does that mean? It means gun violence is so nominal that it has truly zero outcome on your life. So what does that mean about absolute safety? It means your argument is shit. It does not correlate to reducing deaths in the macro view. Freedom > Safety as safety is nominal in a gun based debate. There, science and math just proved you as an emotional decision maker. Really too bad that my degree in statistics from the liberal bastion of University of Wisconsin -Madison had to shit on your liberal narrative. Now run along...
    1 point
  31. Quite a winter wonderland out here today.....
    1 point
This leaderboard is set to New York/GMT-04:00
×
×
  • Create New...